Main Menu

CIM Leaky Pen - Pitting

Started by Trudi, November 09, 2008, 09:12:41 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Trudi

I just adore this colour - superb dark blue - and when I use it to decorate it's beautiful and fine. But If it use it in most of the bead it pits like mad!! I can see it sparking in the flame and the end result looks naff!! After a tip on a different thread I used it to encase turquise - but oh boy, it was darn gone and pitted!

Does anyone have any tips to work it please?

Dragonfire Glass

Is that the one you got from me Trudi?
I posted in another thread that it boiled on me.
I ended up etching the set I made with it

Vicki

when I use it if I don't melt it in the top of the flame it does that trudi, so either we've all got the same dodgy batch, or thats just what it does :-\

Trudi

I had another rod too Colette - thought I'd try another one - but it's the same!! I must have missed your post - any tips??

And how did the etching go?

Vicki - I thought of that too - In Sarah Hornik's book she says it's a spreding colour like Rubino - so I put it higher up - still no joy!

garishglobes

Mine boils too. It does seem to like being worked high up in the flame...

Vicki

it is workable though, you just can't allow yourself to forget & slide down the flame or you've lost your bead to the sparkley burn :'(

June

I made a couple of spacers a few days ago and it was fine ?    I got a couple of rods in a mixed bunch from Hamilton Taylor

Rachel

Mine does that too - it needs to be worked further out.

June

Quote from: June on November 09, 2008, 11:09:02 PM
I made a couple of spacers a few days ago and it was fine ?    I got a couple of rods in a mixed bunch from Hamilton Taylor
Perhaps more luck than judgement, then !!  ;D

Dragonfire Glass

the spacers I made were fine, just the bigger beads weren't  :(

sparrow

Mine boils too - I know that's no help, sorry! But I am used of having my torch on full frontal attack, so I know I burn things easily!
Sabine x

www.littlecastledesigns.co.uk www.facebook.com/littlecastledesigns Ring Top Tutorial

garishglobes

I have my oxycon at 3 1/2 generally - a bit cooler than some, I think? - and it still bubbles.

Vicki

Quote from: sparrow on November 10, 2008, 07:57:49 AM
But I am used of having my torch on full frontal attack, so I know I burn things easily!

oo-er missus :D