Glueing onto fused glass after firing

Started by Wendy woo, August 02, 2012, 06:09:38 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Wendy woo

Hi everyone...can anyone help what kind or type of glue do you use for gluing jewellery bails on pendants and general fused glass onto other object ie picture frames etc...thank you in advance  :)

Nicknack

Hi Wendy Woo.  I use structural epoxy adhesive There's one which takes 24 hours to set properly, though it hardens in a few hours, and one which sets in about 5 minutes, but needs a bit longer to gain full strength.  Warmglass stock both. 

Nick

Zeldazog

Hi Wendy

Glue is brought up many times on the forum, and you'll probably find the camp is divided.  As suggested here, the jewellery tips is the place where this subject is often discussed.

http://www.frit-happens.co.uk/forum/index.php?topic=26447.0

You can use the search box in the top right of your screen - but make sure you're at the top level of the forum, or the search will only work on the specific boards section you're in.  Worth a read to get the mixture of results.

HTH

Dawn