Off Mandrel Sculpture

Started by DeanWilson, February 06, 2011, 02:01:43 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

garishglobes

Absolutely  :) Experimentation breeds genius and there's nothing wrong with a few bits of crap on the way  :)

DeanWilson

Righteyo, putting a load up here...Quite proud of the goddess, have never attempted an off-mandrel one before! The violet drop I know is destined to break but I thought it was pretty :P I quite like the duck-thing I made too ;D It has a wee crown :P Anyway you guys can see for yourself :) I made an awful in your face leaf too XD And the weird face  :D :D You can DEFINITELY tell I made it first  :P

AAAH!!

DSC00283 by DeanWilson, on Flickr

Not much better :P

DSC00272 by DeanWilson, on Flickr


DSC00282 by DeanWilson, on Flickr


DSC00279 by DeanWilson, on Flickr


DSC00277 by DeanWilson, on Flickr


DSC00275 by DeanWilson, on Flickr


DSC00259 by DeanWilson, on Flickr


DSC00258 by DeanWilson, on Flickr


DSC00257 by DeanWilson, on Flickr

Quite hard to photograph properly this one...Quite happy with it :P


DSC00269 by DeanWilson, on Flickr


DSC00265 by DeanWilson, on Flickr


DSC00264 by DeanWilson, on Flickr

Pfft! Lots of photos!! :P

garishglobes

I like the duck a lot, it has character!  :D

That goddess ain't half bad either  :)

DeanWilson

Haha wow thanks so much!! :O :o ;D ;D That's a huge compliment :P And I'm sure I'll get better after a while :D Well, I hope at least ;) :P

Hotglass28


I like the duck too. ;D

Check out Wesley flemming with his bug's.  I would like to be at his level of glass control and skill sometime.

www.facebook.com/pages/The-Owl-Goes-Hoot/567182803365298
www.etsy.com/uk/shop/TheOwlGoesHoot?ref=l2-shopheader-name

Black Heart Beads

I admit when you said on another thread that you made goddess beads I did wonder what a teenage boys take on a goddess bead would look like  ;D And I must say I love your goddess pendant and your duck has a great personality.

If you have not seen it already check out http://www.frit-happens.co.uk/forum/index.php?topic=2261.0 it shows how peoples work has progressed.

DeanWilson

Thanks a lot ;D Just looked at his webpage, wow!! :O Gross and they creep me out but amazing skill involved! I'd have to have been lampworking in the womb to get to his standard :P

kathsd

Hiya Dean, you've been amazingly busy and your beads look pretty good, possibly a silly question but... (I'd rather ask than sit here puzzling my brain cell all night) what do you use to get your off mandrel glass creation into the kiln, assuming at that point your punty rod has been removed?
see I told you it was a daft question, sorry!
kath

♥♥Tan♥♥


DeanWilson

Thanks Tan and Kath! ;D

Oh god way to single me out as an amateur Kath :P I don't have a kiln! :O ...Yet ;) :D I'm just using fibre glass blanket as of yet (although my Japanese cooling bubbles arrived TODAY!! ;D) and I just picked 'em up with forceps and popped it in :P Although you could so the same with a kiln :P The forceps were given to me by a friend and I find them invaluable, in fact I thought everyone used them! (do you? :P) I guess you could use tweezers too if you had a hole in it too :)

♥♥Tan♥♥

 I use whatever is laying nearest my panicking hand :D

Kalorlo

I've been making stuff with loops so I use my pliers to hold the loop.

♥♥Tan♥♥

Do you warm them first? I do but sometimes it doesn't seem to make much of a difference? I have some very nice long tweezers that are a bit finer and seem to be alittle kinder on the glass.

Kalorlo

#28
Hmm, when I remember! They're needlenose pliers and not usually freezing cold to start with because I use them for all sorts. Haven't had them shock anything yet, anyway.

ETA: Actually, by the time I hold loops with them they're definitely warmed, because I use them to try and keep the inside of the loop round after I've put it on! Don't have any graphite rods yet.

♥♥Tan♥♥

I think my tools are just shocking...........its the abuse I give em :D

Actually, I wondered about using a wooden peg to hold things? They are nice and pinchy and shouldn't shock anything, wondering if they would need to be waterlogged first?