Off Mandrel Sculpture

Started by DeanWilson, February 06, 2011, 02:01:43 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

DeanWilson

Hello- I hope this is in the right place! I was just wondering if anyone would have any pointers for me on off mandrel sculpture? I can make beads okay but anything without a mandrel totally daunts me! I had a friend who used to make little frogs on marbles etc but they're too difficult! :( Maybe because I don't have a marble mould yet but I can't even seem to do a lentil bead (just with a knife and a graphite block to flatten) properly! I know it's a long shot but any help would be appreciated :D

Dean x

helbels

Hi Dean

Now first up I should say that I've never attempted off mandrel in my life, so I'm no expert  ;D  However, my understanding is that you actually have the glass attached to the mandrel until the end, and then you melt that last little bit off in the flame and shape if you see what I mean.... so you'd make your round bead right on the end of your mandrel, then your frog on that then melt off the last bit of glass right at the end....

I think, anyway.   ??? Someone more knowledgeable will be along shortly!  ;D ;D ;D ;D ;D

DeanWilson

Oh wow! That's brilliant that there's more than one way to do it!  ;D My friend made a huge gather on a rod itself, shaped it in a marble mould, did the frog or whatever, attached a punty to the other side, reshaped, polished etc and attached a loop to hang as a necklace  ;D I've tried but as of yet I'm rubbish!  ;D It's great being here talking to people who have first hand experience who know what I mean  :D this forum is fab  ;D ;) Thanks a lot :) x

Stacy

Hey Dean,

Personally I found one of the easiest off mandrel things to do when I first started was a heart pendant.
As you say it is formed on the end of a rod and then once you have completed your shaping you cut it off in the flame creating the bottom of the heart.

I shall see if I can find the tutorial on Lampwork etc for you.

Stacy


DeanWilson

Thanks a lot Stacy will check it out!! ;D x

Steampunkglass

Can't really add much more than what Helen has already said. You can always use a glass rod as a mandrel and form your object on there, then flame cut it off. If you use soft glass you'll have to try and keep it all warm so it doesn't shock and break.

Leaves are really easy and fun off mandrel object to make, melt a nice blob on the end of a rod, flatten into a lollipop with mashers. You'll need to re-heat it to get rid of any chill marks, although somepeople like them so leave them. I then use a pair of old scissors to 'cut' veins (don't go too hard as you are just creating dents in the glass, you don't want to cut through them.) Then I make a longer 'cut' for the centre vein and then  using tweezers, scissors, or another rod pull the leaf to a point. It's then just a matter of flame cutting the leaf off the rod (flick it over for a loop, takes some practise but well worth learning) and pop it in the kiln.

Hope that makes sense, there is a link here with some photos (which probably makes more sense than my ramblings!  ;D) http://www.marylockwood.com/files/offhandleafprintquality.pdf

DeanWilson

That sounds really great thanks, will definitely give it a go!  ;D x

garishglobes

Off mandrel stuff is fun  ;D ;D I would personally find it easier to do the whole lot on a glass rod but I was taught that way and it just comes naturally now. It takes practice to get the hang of the heat flow and I agree with Stacy, an easy thing to start with is a heart. The arrowhead or heart tutorial by Shari Slonski is great for starting to 'get' heat flow while still having the comfort of a mandrel.
Otherwise, there are a bunch of off-mandrel demos on Youtube and there was a guy who did several really nice off-mandrel animal tutes which might get you started...http://www.marshglass.com/ though I'd maybe try one of the easier ones first, like the dolphin  ;)

There must be off-mandrel goddess tutes somewhere too.....

Kalorlo

Yup, I've been making hearts from Mr Smiley's tutorial and they're very addictive! (There are photos further on in the link Stacy gave). The loops are the hardest part!

I've also been doing some implosions - Scott Young has a tutorial on WetCanvas. I do have a doming block that I've been using to shape them, but I'm trying to make half-round pendants with flat backs.

It's fun but scary  ;D

♥♥Tan♥♥

Dean, start small. Take a rod, heat a blob of glass and smoosh it down so you have a disk, that disk can be the start of lots of things. If you heat it right through and attach a rod to the tip and pull then you have made a leaf. If you add four small blobs and a big blob then you have a turtle. If you heat it and cut it using ordinary kitchen scissors then you have a flower.

The whole rod with the work on the end can go into the kiln until you need it again.

When I make loops I keep a brass rod to hand, I pull out the strand of glass, let it firm up slightly then pull it back down to meet where it comes out of the finished piece, burn it off and then SLOWLY go back into the flame, heat the loop just a little and push the rod through for evenness.

If you get panicky about making loops, make a bead on a mandrel and put it in the kiln, then make your off mandrel piece, take the mandrel with the bead on it out of the kiln and heat the two areas where the bead and the piece will meet, join together and you have a neat loop!

DeanWilson

Thanks for all your advice! You're definitely right to start small I think, I always try to do things that are far too difficult and end up with my fingers burnt! My goal I think is to make off-mandrel goddesses; I've seen a few and they are just stunning! I still struggle with on mandrel ones and, as I'm on a hot head the amount of time it takes to melt the sheer amount of glass required annoys me >:(

Thanks for the tut Tan and the links guys :)

Dean ;D

garishglobes

Actually, with something like a goddess you work from one end to the other, you wouldn't need to melt all the glass at once - which would help on a HH! The thing with bigger/more complex soft glass sculptures is to work from one end of the piece to the other so that once you have finished a part, you let it cool and don't reheat it (reheating will cause thermal cracking). I am probably not explaining it well, will have a look later and see if I can find a tute.

DeanWilson

Made some off mandrel pieces...Mostly just experimenting, tried to make a yellow and white daisy...It went HORRENDOUSLY wrong and now I have an equally horrendous woman's face thing I made with yellow-white skin and blue hair XD It's awful :P Will check if they're cool enough from the fibre blanket and snap a few pics ;D

♥♥Tan♥♥