How do you clean your beads?

Started by sparrow, February 15, 2009, 06:55:23 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

fionaess

I soak mine in water then change the water for warm water, and use my rechargable dremel type thingy with the diamond reamer attached... find the hole, stick the reamer in, put the bead under water, turn on my dremel and clean away. Then I clean them off under hot soapy water and occasionally stick them in the dishwasher in the cutlery holder...


If it's got a hole, it's a bead !

Shadowdarner

I use a reamer attachment on my glass grinder.  This is quick and easy.   I started out cleaning them by hand but it took way too long for my liking.   :)

firedinglass

hi Delana, that sounds interesting ...do you have an inland or kristall grinder and did you buy the reamer in the UK? How would you do thid though as the grinder doesn't have a choice of speeds - doesn't it spin too fast......


www.facebook.com/firedinglass
http://www.etsy.com/shop/firedinglass
Lisa

Shadowdarner

Lisa,

Yes it is fast!  I have a Kristall grinder. I just make sure that I have LOTS of water going down through the bead when I introduce it to the grinder and I don't force the bead at all.  I use 2.5 to 3mm mandrels for most of my beads so the hole is large enough.  I have had a couple of 'mashed beads' crack but I can't be sure if this is the cleaning or different glass families not playing nice together or that I mashed the bead a bit too flat and it broke because the glass was too thin along the line of the mandrel.

I buy my reamer at a local supplier here in Belgium http://www.tiffany.be/ but you might be better off price/shipping wise looking around in the uk.  If you do get a reamer make sure you get an attachment that sprays the water up onto the reamer...for really large beads I also use a soaked sponge and drip water down into the top of the hole.

I have been thinking about an alternate way to clean beads since I have had a couple of beads crack on me....for the majority of my beads though I'm very happy to continue with the grinder.

If you have further questions or you need help navigating around the site I gave you (it's in Netherlands) let me know.  :)

Wishing Wells Glass

If I have a large amount to clean after a particularly prolific session I fill up a bowl with warm water and let them soak a little first.  Then I pick them up and clean them with an electric bead reamer, dipping them in the water often.

If I have a smaller amount to clean because my mojo went on walkabout (or made several very complex focals), I often use the water from the previous day.  Dunk them in the water and clean them out, dipping them often.

My bead reamer is on a cord but I don't actually put the tool in the water ever.  Plus I'm from America where we have power sockets in our bathrooms.. *shock horror*   ;)

x

squirsygirl

I let all my beads soak in lovely warm water, with a drop of washing up liquid, for at least a couple of hours.

Then I rinse, dump them all in a nice big bowl of clean warm water, and use an old pearl reamer to clean by hand.

Then I let them dry on kitchen roll, and polish with a clean cloth.

I have, however, dropped hints as subtle as a sledgehammer for a dremel for my birthday!

But at least this way I can sit in front of the television!


Josephine

I use a rechargeable dremel with a small bowl of warm water, even if I dropped the dremel I don't think it would go far enough in the water to damage it (or me). I may have chipped the odd bead but not many and I reckon if there was a problem lurking (cracks and the like) the dremel would make sure they came to light sooner rather than later.

TiaraHelen

I punctured my fingers a few times using the hand-operated reamer so got an electric one from Martin.  I have a flat shallow dish that I put a little warm water into, on top of a tea towel and I just go ahead and use the drill in the water, keeping the bead actually in the water, dipping the point of the reamer in the water, keeping the motor part dry as possible.  OK so far! 

The drills that people have posted links to look like great value ...
Helen x

Even after all this time, the sun never says to the earth "you owe me".

Dizzy Di

BQ flex shaft £20 a few years ago, alot better than keep stabbing myself by hand, and less breakages.Soak beads and then ream out with flexi shaft, clean withD

Trudi

I always stab myself if I ream by hand!! Ouch!

GlassOcean

#25
Me too, I have been using my dremel dry with no water, I am far too paranoid to dip it in actual, real, wet water!!!

I'd love a battery dremel though.  I am off to screwfix to see how much they cost!!!   ::)

Modified to say EEEEKKKKKKKK they are £68.50!

SueP

Quote from: Josephine on February 15, 2009, 03:40:00 PM
I use a rechargeable dremel with a small bowl of warm water, even if I dropped the dremel I don't think it would go far enough in the water to damage it (or me). I may have chipped the odd bead but not many and I reckon if there was a problem lurking (cracks and the like) the dremel would make sure they came to light sooner rather than later.

Me too - bought a dremel type set (JML I think) for about a fiver a couple of years age.  Turn on and off when in the hole as have scratched a few nice beads in the past.  Just got an ultra sonic cleaner so put them in there after for a real spruce up - there's always a bit of bead release sludge in the bottom of it even after good clean with the dremel. ;D

sparrow

Oh, how I keep wishing somebody would invent an ultrasonic cleaner where you just chuck'em in straight from the mandrel, and they come out perfectly...  ::) ::)
Sabine x

www.littlecastledesigns.co.uk www.facebook.com/littlecastledesigns Ring Top Tutorial

SueP

I know wouldn't that be great - now if it could slide them off the mandrel as well .... ;D ;D

Kaz

Quote from: GlassOcean on February 15, 2009, 09:34:18 PM
Me too, I have been using my dremel dry with no water, I am far too paranoid to dip it in actual, real, wet water!!!

I'd love a battery dremel though.  I am off to screwfix to see how much they cost!!!   ::)

Modified to say EEEEKKKKKKKK they are £68.50!
Probably not a great idea to use it completely dry. a) it will quickly wear out the diamond bits and b) bead release in dry dust form is a bit dangerous!
Kazx
She's made of real glass. She got real real emotion. But my heart laughs I have that same sweet devotion!