Moved to Germany need help with gas

[Susan]

Hi I hope some one out there can help me. I have just moved to Germany hoping after too many years of not having room to set up my glass and lamp work toys to start to play .I went with my torch to get my first gas tank to find that it docent fit my regulator .I know I can get one from the DIY shop but I don't want to use the wrong thing .I know that I should be using a flash back but I don't think the regulators in my shop have this built in . My torch is a Cricket that came with all the bits so I haven't had to get anything before .After years of longing to retire here and start playing I don't want to blow the house up !
If any one has had this problem and found out what to do please help .

Susan

[sparrow]

Hi Susan,

if I were you, I'd contact one of the German suppliers of lampworking stuff, see if they can help you:

http://stores.ebay.de/farbglas-werkzeug
http://ombos.de/


.....they are the two that spring to mind. Alternatively, you could try the German forums:

http://www.beadclub.de/
and
www.herz-aus-glas.com

and ask there.

Hope you find a way, and good luck,

Sabine

[Susan]

Thank you Sabine.I will try them .after so long I just want to start playing.
Susan

[cbeadies]

Another place worth trying may be Berlin Beads.

http://berlinbeads.com/

[Susan]

   
Re: Moved to Germany need help with gas
« Reply #1 on: March 17, 2012, 07:09:58 PM »
Quote
Hi Susan,

if I were you, I'd contact one of the German suppliers of lampworking stuff, see if they can help you:

http://stores.ebay.de/farbglas-werkzeug
http://ombos.de/


.....they are the two that spring to mind. Alternatively, you could try the German forums:

http://www.beadclub.de/
and
www.herz-aus-glas.com

and ask there.

Hope you find a way, and good luck,

Sabine

Thank you Sasbine
I emailed Ombos and they got back to me @7am today!
They were very helpful and will be able to help me with this.
Thank you for your help

Susan