Main Menu

Dark Tuquiose (effetre) ?

Started by Krysia@No98, May 23, 2009, 02:58:26 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Krysia@No98




Been torching this morning and I used what I thought was Dark Turquoise. 



It's got silver bits in it.  It is dark turquoise or is it something else?

(scuse white stuff was practising stringer control, It was meant to be a straight line - no only kidding!)
-* -  Courage is going from failure to failure with out loosing enthusiasm -*-

squirsygirl

I use a HH and bulk - almost of my coppery blues go a little silver.

I think it's a chemical reaction with the metals in the glass, and be really pretty.

Kirsty

Krysia@No98

yeah I'm on hh and Bulk too.

I thought it was pretty - just very suprised!

Ta

Krysia
-* -  Courage is going from failure to failure with out loosing enthusiasm -*-

Redhotsal

It's reduced - the hothead doesn't have quite enough oxygen to keep the metal connected to its oxide. Metal oxides are in the glass to give the glass its colour. More oxygen = correct glass colour. Not enough oxygen = metally lustres.

Can be quite a nice look but it's also difficult to control with dk turquoise and a hothead. You can sometimes get rid of the grey/metally hue by soaking in Cillit Bang (Lime and Grime)

Krysia@No98

-* -  Courage is going from failure to failure with out loosing enthusiasm -*-

Paula

Sal, you are beginning to become 'Sal the Cillit Bang Gal'.!

Paula

Redhotsal

I am - you'd think they were paying me a commission!  :)

mazmeabead

Sal - holding bottle of Cilit Bang ;D

Bang and the reduction comes right off  ;DLOL

Maz x

catriona

I also find that Jocks bead release remover rubbed on the bead takes it away .
xxcatxx

BeadyBugs

Really must try the Cillit Bang thing.  Etching it does the job too.  A 5 second dip will take off the reduction if it's slight.  Or a full etch if it's heavy.

HP x
Helen P

Trudi

Quote from: catriona on May 23, 2009, 11:51:15 PM
I also find that Jocks bead release remover rubbed on the bead takes it away .
xxcatxx

how on earth did youfind that one out??  :D

Katiequiggle

Well you learn something every day.  It doesn't always go grey, mine goes pink sometimes,  sometimes it stays turquoise.  It doesn't do it with light turquoise.

catriona

LOL i was cleaning bed release out of it and some got on bead i must have been rubbing as i turned the mandrel to clean inside when finished i noticed a patch where reduction rubbed away so got a clothdiped in pot rubbed bead allover and hey presto unblemished bead . ;D