Quick releases - question for people who sourced their own

Started by Kalorlo, November 19, 2010, 04:26:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Kalorlo

I need to add quick releases to my current propane hose so I can finally get my Minor up and running. Problem is, I have 6mm ID hose (bulk kit from Martin), and all the quick releases I can find *anywhere* are for 8mm ID hose.

I know some of you have done this yourselves before! Did you have 6mm hose and the 8mm ones fit anyway? Or do I need to replace the whole hose and fittings? I'm very confused - I know that Martin sells quick releases, but his don't specify what size they actually are and are extremely expensive. The whole hose route would be much cheaper, especially as I need two (or one and a half, but eh).

I did have a search around, and supposedly 6mm ID hose is the ideal size for a Minor, so that's not so bad... if I can find the pieces to fit!

???

Kalorlo

Anyone got a clue? I don't want to end up in a situation where I've taken my Hot Head off and end up with no connected torch!

Lush!

Nope, can't help sorry.  I'm so clueless about stuff like this, I actually got Martin to connect quick releases on all my torches so I can just swap and change whenever I want to.


www.lushlampwork.etsy.com

♥♥Tan♥♥


Kalorlo

I asked her first  ;)

It's the size thing that's the problem - George said she'd used 8mm all the way through for her setup. Which I can do if I just start again. But if 6mm quick releases don't actually exist and I can use 8mm anyway, then that's easier!

I mean, I can ask Martin what size his quick releases actually are, but that's rather cheeky if I'm going to turn round and get them somewhere else...

♥♥Tan♥♥

Have you asked at your local plumbery type place? I find if I simper and tell them how manly they are those hairy apes love helping out ;)

Kalorlo

Meh, I was hoping not to have to speak to them until I actually knew the answer! We'll see, but I'm kinda expecting them to go, "No, that says 6mm, it won't fit". Or just stare at me blankly.

awrylemming

I'm going to buy some from Martin on Monday, just bought my set up and thought they came with, and now realise they dont so really need to get them. I'll ask for you if you like?

dangerousbead

I went through all this recently when the coupler failed on my bulk to hh. It got so complicated that I decided Martin was the best bet, expensive or not. He usually is. Bless him. :-)

Kalorlo

Quote from: awrylemming on November 20, 2010, 10:38:44 PM
I'm going to buy some from Martin on Monday, just bought my set up and thought they came with, and now realise they dont so really need to get them. I'll ask for you if you like?

That would be really sweet of you! I'll also try the gas/hardware place along the road that's open on Sundays and see if they know anything.

Kalorlo

Well, that was a waste of time! The place that the Calor website says is a Calor shop is actually a grocery shop...

♥♥Tan♥♥


Kalorlo


♥♥Tan♥♥