Making a set of beads in exactly the same size - Arrrrghh!

Started by Fruddy, November 06, 2010, 05:24:19 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Fruddy

I'm really struggling with this.

I've bought some findings and some stringing wire etc., so I thought that I would have a go at making a couple of simple bead sets with a view to making my first bracelet.

However, I'm finding it really difficult to make a set of the same size!

I tried last night to make six simple beads, three black and three red, with a little silvered ivory stringer for interest.  How hard can that be, I thought!  Bloody hard!

I started trying to remember how many wraps of glass I used, for example 10, but I could never tell when I had completed a wrap on the mandrel, particularly towards the end when the wind of glass got bigger (I use the snail shell technique).  I thought that they were all reasonably the same sized, but when I took them out of the kiln this morning they were nowhere near - 2 of them were pretty close, but the other 4 were all different and obviously didn't look anything like a set!

Can anyone give me any advice?   I see loads of gorgeous bead sets on here, and they are all identical in size.  How do you achieve this?

Kaz

Sorry Rachel but the simple answer is years of practice :)
It's a bit like cooking - eventually you know just how much of the ingredients you need!
Kazx
She's made of real glass. She got real real emotion. But my heart laughs I have that same sweet devotion!

helbels

Fruddy, that's one of the hardest things to do.  You could practice, practice, practice... or alternatively use calipers to try to measure your beads as you make them.

However, the easiest way is to buy a beadroller or two from cgbeads.com - they aren't cheap but worth their weight in gold
- the rounds and donuts are an absolute godsend and make it super easy to get the same size beads.

Helen.

Fruddy

Quote from: Kaz on November 06, 2010, 05:28:19 PM
Sorry Rachel but the simple answer is years of practice :)
It's a bit like cooking - eventually you know just how much of the ingredients you need!
Kazx

I had a sneaking suspicion that this was going to be the answer! :)

You know me......patience is not something that I have in abundance, but I shall persevere....!

I struggled for a few weeks getting my big hole beads precisely round, but have mastered this now, so shall adopt the same approach with the bead sets!

Off to the shed now to put this into practice!

Thanks guys.

Fruddy

Quote from: helbels on November 06, 2010, 05:28:43 PM
Fruddy, that's one of the hardest things to do.  You could practice, practice, practice... or alternatively use calipers to try to measure your beads as you make them.

However, the easiest way is to buy a beadroller or two from cgbeads.com - they aren't cheap but worth their weight in gold
- the rounds and donuts are an absolute godsend and make it super easy to get the same size beads.

Helen.

Thanks Helen.

awrylemming

Try twisting a piece of wire into a circle about the size of the beads you want - it gives you the chance to check your bead size as you're making it.  But it's taken me a good six months just to be able to produce a few beads of similar size, it is down to practice.

♥♥Tan♥♥

Fruddy, not sure if this will help because I use the counting wraps method but I have heard of people marking off their rods into specified lengths and then only melting up to that point. Following a similar method I have read of people cutting the rods into exact lengths and attaching them to a clear rod and only melting up to the clear.

Does any of that make sense? It does in my head

ScarletLeonard

I went through a while wondering this and I ended up making a load of plain white beads in different sizes. (all the rough sizes that I liked to work to.)

I then wrote on them how many wraps they were with a small perm marker.

When I went to make a set of beads I took out the size I wanted and put it in between my fingers on the mandrel

I checked the bead I was making to the dummy and it helped don't use the dummies any more.

Fruddy

Quote from: Tan on November 06, 2010, 05:37:37 PM
Fruddy, not sure if this will help because I use the counting wraps method but I have heard of people marking off their rods into specified lengths and then only melting up to that point. Following a similar method I have read of people cutting the rods into exact lengths and attaching them to a clear rod and only melting up to the clear.

Does any of that make sense? It does in my head

It makes perfect sense Tan, and is a bloody good idea!   I shall try that!  Thankyou!

AnnaSpanna

I have found it just takes judgement that only comes through practice. My mum (jayspangles) is always asking how I get mine about the same size without always using a beadroller and I just can't explain it - I guess they aren't all perfectly the same size but near enough and unless they are going to be threaded in close quarters then as long as they are within perhaps 2mm then I'm more than happy. The beadrollers are great though - and dead easy to use. But yes practice practice practice is my reckoning.

cbeadies

I'm still at ppp stage. But have found that if I slip a bead of the size I am aiming for  on to the other end of the mandrel, it is then there by my fingers as a guide. I can try and make my new bead to that size. (The 'guide' bead does not move right up the mandrel because of the bead release - make sure it was made on the same size mandrel as you are using.)

As each bead is made, I slip the 'guide' bead off and on to the next mandrel. A little fiddly I guess, but I find it helps me!

GlassOwl

That sounds a great idea thanks

My beads are getting there for uniformity like I can get 7 out of 8 correct and probably because I am sick of the combination, number 8 comes out a totally different size.

Will try this as it sounds a great idea

Thanks

ARBeads

I started by making a graduated set of beads I liked the sizes of, and then left them lying around my bench as reference beads which I could  hold against the new bead for a visual reference.

Really is a PPP thing  - now I do most of them without really thinking about it, though I think you get used to the weight of  bead as your forming the glasss.

Have fun practising x
Ruth & Andy


www.etsy.com/shop/arjewellery for beads!

turnedlight

I just make lots and then pick the best for the set :) If they vary in size, line them up so they graduate, smallest at either end, largest in the middle. It's often nice to see a uniform set, but also nice to have a mix which go together, but are perhaps not all exactly the same. Eventually after a year or two you'll find your beads end up similar sizes more easily.
kathryn

Princess Peggy (Priscilla McGirr)

You could try making a bead out of blue tack, and keeping it by you for reference.....I do this when I'm using my lentil press...it's hard to visualise how much glass you need to fill it.

Or make lots of beads and then match them up afterwards.  I used to do this when I was throwing pots with lids....make lots of pots, lots of lids, and then some of them are bound to fit, and keep the odd ones for next time!
Pris
My Website http://www.dancingwithglass.co.uk  My Etsy http://www.etsy.com/shop/princesspeggy01
My Facebook page: https://www.facebook.com/DancingwithglassLampwork