Cleaning Bead Holes

Started by Bumpy Beads, June 10, 2008, 08:52:58 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bumpy Beads

I just found this tip at www.glasscampus.com.

I don't know if it works. Has anyone tried it? I know I will as cleaning beads has to be the worst part of making beads. I also spend a fortune on replacement bead reamers as they don't seem to last any time at all.

Oh yes, the tip..............

Cleaning Bead Holes

Often the most efficient way to do something is also the most expensive and the least
expensive way is the least efficient. Cleaning bead holes is an exception. The most
efficient and most effective way is also the least expensive. You don't have to buy and
special expensive device. Just use silicon carbide grinding grit. The same stuff that is
routinely used by glass artisans to polish glass.

• Place a mandrel (or short length of mandrel) in the chuck of an electric drill.

• Dip the mandrel in water

• Dip the wet mandrel into silicon carbide grit.

• Turn the drill on and use it to grind out a beautifully clean hole.
Heather


My Etsy Shop

Kaz

Do we believe it?
I would have thought a drill is a bit like a sledgehammer to crack a nut though?
Kaz
She's made of real glass. She got real real emotion. But my heart laughs I have that same sweet devotion!

Sherry Bellamy

#2
I had a student bring one of these to class a couple of weeks ago:

http://www.homedepot.ca/webapp/wcs/stores/servlet/CatalogSearchResultView?D=937472&Ntt=937472&catalogId=10051&langId=-15&storeId=10051&Dx=mode+matchallpartial&Ntx=mode+matchall&recN=0&N=0&Ntk=P_PartNumber

She snipped off one end, and just ran the thing through the bead. She's been using the same blade for a year. I'm going to pick one up this weekend and give it a try. I like the Beadreamer, but I choke at paying $33.00, plus $5.00 for shipping. Never again, I'm afraid.

Edited to say: I misquoted the price for the Beadreamer. It's $29.95, shipping is $5.50 to Canada, $6.50 to the UK. (Actual cost to ship to Canada was 76 cents.)

Lush!

Quote from: Bumpy Beads on June 10, 2008, 08:52:58 PM

• Place a mandrel (or short length of mandrel) in the chuck of an electric drill.


I would expect a mandrel will fit into a dremel, won't it?



So where do we get silicon carbide grit then?   ::)




www.lushlampwork.etsy.com

saffie

Quote from: Lush! on June 11, 2008, 06:24:37 PM

I would expect a mandrel will fit into a dremel, won't it?



I would imagine so!!! worth a go tho
Quote from: Lush! on June 11, 2008, 06:24:37 PM

So where do we get silicon carbide grit then?   ::)


? B&Q not sure really worth hunting down though by the sounds of it

Kaz

You mean there's something you can't actually buy on ebay?
She's made of real glass. She got real real emotion. But my heart laughs I have that same sweet devotion!

Kaz

I take that back - you can buy it on ebay
http://cgi.ebay.co.uk/300g-of-400-Grade-Silicon-Carbide-Grit-Tumble-Stone_W0QQitemZ330241080783QQihZ014QQcategoryZ3237QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Anyone know what grade you need?
I guess you could just use the handheld electric bead reamer with a shortened mandrel in?
Kaz
She's made of real glass. She got real real emotion. But my heart laughs I have that same sweet devotion!

Bumpy Beads

#7
I'm going to try Sherry's suggestion. It should be tidier than loose grit and achieve the same effect. I'll report back, I've just ordered a blade.  ;)

I forgot to mention that you can buy the grit from most lapidary suppliers. I think you'd need around 1200 grade, which is fine.
Heather


My Etsy Shop

dinah46

#8
I use the tile cutting blade for my 2.4 mandrel beads as only bought the 1.6mm beadreamer. The tile blade works well. I bought a 12" on in B&Q and just cut it in half

It works quite well for cleaning the big hole beads which I've become addicted to making :D

Edited to say that although I have grit from the days when I used to tumble polish stones, I wouldn't fancy trying to use it for cleaning beads, sounds a bit messy to say the least

Mary

#9
For those of us using a Dremel type tool, I can heartily recommend this place in the States for long reamer tips. I'm still working my way through my first pack! Search for reamers, it won't paste the right page.
www.widgetsupply.com/miva/merchant.mvc?Screen=CTGY&Store_Code=WS&Category_Code=bead-reame

Kaz

Oh they're good! I have been buying the replacement heads from Martin and only using the long ones. Off to measure if these will fit in the reaming tool....
Kaz
She's made of real glass. She got real real emotion. But my heart laughs I have that same sweet devotion!

Bumpy Beads

I promised to report back once I'd tried one of these tungsten carbide rod saw blades. Well I've tried one and its fabulous!! A clean bead in seconds and I'm certain the blade wouldn't wear out for ages. The only snag is that it's too thick to fit in a bead hole made on a 1.6mm mandrel, which is pretty much all I ever use. Ah well! But I will definitely be using this for my larger hole beads. I have searched to see they make thinner blades and I've had no luck yet.

Quote from: Sherry Bellamy on June 11, 2008, 06:01:38 PM
I had a student bring one of these to class a couple of weeks ago:

http://www.homedepot.ca/webapp/wcs/stores/servlet/CatalogSearchResultView?D=937472&Ntt=937472&catalogId=10051&langId=-15&storeId=10051&Dx=mode+matchallpartial&Ntx=mode+matchall&recN=0&N=0&Ntk=P_PartNumber

She snipped off one end, and just ran the thing through the bead. She's been using the same blade for a year. I'm going to pick one up this weekend and give it a try.  price for the Beadreamer. It's $29.95, shipping is $5.50 to Canada, $6.50 to the UK. (Actual cost to ship to Canada was 76 cents.)
Heather


My Etsy Shop

dangerousbead

I ordered a BeaDreamer from Dave at www.artintheround.com in the states at $29 as a bit of a bday prezzie, first outing i bent it and really bruised my thumb, Dave had asked if I had received the bit so I told him my tale of woe. Fantastic man he has offered to replace it at his cost and call me to talk me through exactly how to use it, even though i read the instructions three times before. Now that's what I call Fantastic service. ooh it restores your faith doesn't it?