newbie question

[alchemist]

Ok..... just got  a creation station   but has anyone got any tips on how to attach a hot head on bulk? I've rotated the clamp over but the hot head is a bit wobbly when held in place with the foamy bits (technical term!) and the pictures they sent with it says it should be attached to the top of the mapp gas ...but when on bulk the gas tubing is obviously thinner
I know you guys on here will have some useful ideas      (and I'm itching to play)

[jammie]

In minesthe hot head bit is pushed into the gap in the metal bit of the creation station so the brass bit of the hothead sits in the space then the black foamy bits are pushed around to set it into place, 2 at the back and the two at the front but wiggled around to jam it in. If that makes no sense and someone doesnt explain it better I will take a pic.   http://www.frit-happens.co.uk/forum/index.php?topic=305.600 this might show what I mean   if you scroll down to my set up pic

[alchemist]

Aw thanks   that's very helpful.....off to give it a try

(Ooooh I do like your set up  )

[Margram]

I've got storage envy Jean

[jammie]

Haha thankyou! It's a cabinet from a catalogue with B&Q pipes! Oh how my OH hated cutting them down. I told him how worth it ti was as everyone likes it but he just made rude gestures.  The glass jars are from asda the spice racks from asda and the mandrel holders a cribbage board. Trying to think of what I can jam in the holes though as they all tend to fall towards each other.

[alchemist]

Yeah that's better, thanks again

(Blu-tak for the holes?)