Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Tools and Presses => Topic started by: aoturoa on October 15, 2008, 03:38:45 PM

Title: Press Recommendations
Post by: aoturoa on October 15, 2008, 03:38:45 PM
I'm want to venture into presses and would like to know which ones you guys like using / are the easiest for a newbie to start with?

I've had a look on Tuffnell Glass, but Martin doesn't seem to have much in at the moment. I'm limited to UK or Europian shops as I don't have a credit/debit card.

Bit clueless really  ::)
Title: Re: Press Recommendations
Post by: Sulis (Hazel) on October 15, 2008, 04:27:11 PM
Hi Helen, I find my lentil press the easiest one to use - or a crunch press is quite easy too. Maria Louisa does some lovely lentil presses  ;)
Title: Re: Press Recommendations
Post by: Lush! on October 15, 2008, 05:16:24 PM
I hear Tuffnell's are expecting a delivery ... any day now apparently  ;)
Title: Re: Press Recommendations
Post by: Shirley on October 15, 2008, 05:27:20 PM
nugget trio is my favourite, or Cattwalk crunch as it's very versatile
Title: Re: Press Recommendations
Post by: Vicki on October 15, 2008, 05:35:55 PM
I would say lentil if you like the round thang or a nugget if you like corners :D
Title: Re: Press Recommendations
Post by: SueP on October 15, 2008, 09:10:10 PM
I love my pillow press from Maria Louisa I can use it "properly" to get nice sharp corners or not worry too much about the quantity of glass to get a nice "crunch" shape  ;D

In fact I think I need to wean myself off it and try some others! ;D ;D
Title: Re: Press Recommendations
Post by: Sulis (Hazel) on October 15, 2008, 09:15:02 PM
I also have one of Martin's and it's fabulous too, very reasonable, especially if you can collect from a local show so no postage to pay.

For sure, make sure you get something where it's not too hard to judge how much glass to wind, or like the lentil trio, something that if you add too much glass, you can just make the next size up! (I'm always doing that  ::))
Title: Re: Press Recommendations
Post by: Pat from Canvey on October 15, 2008, 11:08:34 PM
If I add too much glass for a lentil and get a rim around the edge, I just heat the edge and pull the extra glass away with tweezers and reshape.
Title: Re: Press Recommendations
Post by: Sherry Bellamy on October 18, 2008, 01:06:12 AM
I've been known to heat it up and snip it off with scissors!
Title: Re: Press Recommendations
Post by: Trudi on October 20, 2008, 01:42:12 PM
Quote from: Sherry Bellamy on October 18, 2008, 01:06:12 AM
I've been known to heat it up and snip it off with scissors!

That's serious!
Title: Re: Press Recommendations
Post by: Soozintheshed on October 20, 2008, 05:35:43 PM
Come to Carlisle and play with all mine, I have a few ;)    It's only up the M6
Title: Re: Press Recommendations
Post by: aoturoa on October 20, 2008, 06:03:24 PM
Quote from: Soozintheshed on October 20, 2008, 05:35:43 PMCome to Carlisle and play with all mine, I have a few ;)    It's only up the M6

Hm, I wonder if the OH needs to go up that way?  ;D
Title: Re: Press Recommendations
Post by: Rachel on October 20, 2008, 11:08:47 PM
I agree - the lentil is probably one of the easiest to start with.  I've got the Zoozii trio and it's probably my most used press (apart from the piddly little 13mm cavity!)  Although I really love my nugget press from Maria Louisa. 

Title: Re: Press Recommendations
Post by: Kaz on October 20, 2008, 11:22:07 PM
Helen
When I was just starting out, I bought quite a few presses but then found them really difficult to use - too little or too much glass, sharp edges on the beads etc. I then went back to practising trying to get perfectly balanced beads and hand shaping beads as well. Now I can use the presses much better as I understand much more about how glass behaves (and how different the various glasses can be). So, a little word of warning from my own experience - don't get too easily seduced by the presses, you do need to ensure that you are developing your basic lampworking skills at the same time! If you are investing cash, then Passing the Flame would be a much better investment in my humble opinion!
Kaz
Title: Re: Press Recommendations
Post by: aoturoa on October 21, 2008, 09:02:35 AM
Good words of advice Kaz.

I hadn't realised just how much presses actually are - there's a big pillow one on Martin's site but it's 30-odd quid. Oookay, so not yet then. Heck, I've not even got a marver yet.

Must. Slow. Down. I can't learn everything at once, no matter how much I want to.

And a few lessons wouldn't go amiss if I were spending big money (and sadly £30 is big money right now).
Title: Re: Press Recommendations
Post by: *rowanberry* on October 21, 2008, 10:13:13 AM
Good words Kaz!

I'd get yourself a good masher, the coonvallyb is ace - that way you can do handshaping etc and learn good techniques for that - but press them into interesting shapes (ie an oval bicone when pressed makes a lovely marquis, a shorter rugy ball shape will give you a round tab etc etc).
http://cgi.ebay.co.uk/BEAD-PRESS-Masher-Polished-Faces-Affordable_W0QQitemZ150304338786QQcmdZViewItem?hash=item150304338786&_trkparms=72%3A1301|39%3A1|66%3A2|65%3A12|240%3A1318&_trksid=p3911.c0.m14
(his other presses are very affordable and good, I have a fair few myself).
Get one of them and then a possibility of shapes can be achieved.
Other than Lentils, I am a big handshaper - it allows you to get a better relationship with glass and how it moves and behaves - essential knowledge when you start out in my opinion!
Title: Re: Press Recommendations
Post by: garishglobes on October 21, 2008, 03:54:04 PM
Coonvalley's hand-held marvers are nice for tubes and bicones too, and again quite affordable. But I'd get a marver first (one that you can shape on, not one of the hand-held bicone/tube ones). You can go a long way with a flat marver and a masher!
Title: Re: Press Recommendations
Post by: aoturoa on October 21, 2008, 04:46:45 PM
Unfortunately I can't buy from abroad unless I ask my mate to get something for me.

I've got my eye on Martin's HH mounted marver (try saying that drunk!).

And a load more glass  ;D
Title: Re: Press Recommendations
Post by: sublimekate on October 21, 2008, 05:10:10 PM
What Kaz says is very wise indeed  :)

After I got my first lentil press I spent weeks making nothing but lentils, and when I got around to trying to make I round bead I couldn't for the life of me get two the same and had to practice all over again, and really think about what I was doing.

I got a thin lentil press and a tab press from Maria Louisa, the lentil press is fantastic, but I have to admit I'm still struggling with the other one and have shelved it for now, I obviously need to get a bit better before I have another go.

They're great fun though, but boy do some of them use a lot of glass!!
Title: Re: Press Recommendations
Post by: *rowanberry* on October 22, 2008, 02:16:10 PM
A handheld graphite marver is a must in my opinion - I have a torch top one but to be honest I rarely use it! BUT if you use it with your handheld one you have a masher :D But as has been said, i think a good marver and a masher should be your first tools :D
Shame you cant get stuff from abroad as I got a fantastic graphite marver for £5 on ebay once! Twas from the usa.
Title: Re: Press Recommendations
Post by: Steampunkglass on October 22, 2008, 09:18:43 PM
QuoteWhat Kaz says is very wise indeed 

After I got my first lentil press I spent weeks making nothing but lentils, and when I got around to trying to make I round bead I couldn't for the life of me get two the same and had to practice all over again, and really think about what I was doing.

I soooo agree!!! I felt it made me lazy, and when I tried making 'normal' beads again felt I had to re-learn everything! So frustrating.

I prefer mostly non press beading at the moment, but the one press I wouldn't live without is the triple straight spree from Sandy's Spheres of Glass - I've got to a point where I've used it so much it's too hot to touch! I love the chunky feel and neat edges you can get. I have a 'normal' triple lentil, it's easier to get the amount of glass right, but I hardly use it.

A marver of any type is a must! I have loads of bits of flat metal I use, although I still come back to the little double sided metal one I got from Tuffnells when I got my first hot-head beginners kit. I think Martin has them seperately for £5, well worth it too! If you do get a graphite maver don't drop it on the floor.....I speak from experiance! Doh!
Title: Re: Press Recommendations
Post by: Soozintheshed on October 22, 2008, 11:28:42 PM
Quote from: aoturoa on October 20, 2008, 06:03:24 PM
Quote from: Soozintheshed on October 20, 2008, 05:35:43 PMCome to Carlisle and play with all mine, I have a few ;)    It's only up the M6

Hm, I wonder if the OH needs to go up that way?  ;D

Here is something to tempt you  ;D  I just bought another 11 presses from Dora, fun fun fun  :)
Title: Re: Press Recommendations
Post by: clasicat on October 22, 2008, 11:31:16 PM
Quote from: Soozintheshed on October 22, 2008, 11:28:42 PM
Quote from: aoturoa on October 20, 2008, 06:03:24 PM
Quote from: Soozintheshed on October 20, 2008, 05:35:43 PMCome to Carlisle and play with all mine, I have a few ;)    It's only up the M6

Hm, I wonder if the OH needs to go up that way?  ;D

Here is something to tempt you  ;D  I just bought another 11 presses from Dora, fun fun fun  :)
11  :o flipping eck sooz I think I will come up and have a play lol
Title: Re: Press Recommendations
Post by: TheJanie on October 23, 2008, 01:33:14 PM
I have one press - the only I've tried so far.  It's the square tile press from Cattwalk and with the benefit of hindsight, I wish I'd gone with the lentil - I think it would have been a much easier press to learn with...
Title: Re: Press Recommendations
Post by: Soozintheshed on October 23, 2008, 02:33:09 PM
Everyone welcome, kettle is always on :)

(Bring cake)
Title: Re: Press Recommendations
Post by: deeko1968 on October 23, 2008, 02:35:51 PM
One question about presses is the lentil press the easy one to start with,
thinking of getting one soon.

would like the pillow or nugget press. ;D
Title: Re: Press Recommendations
Post by: aoturoa on October 23, 2008, 04:07:28 PM
Quote from: clasicat on October 22, 2008, 11:31:16 PM11  :o flipping eck sooz I think I will come up and have a play lol

Hey Claire, do you want a passenger?  ;D

Pay half the petrol and most definitely take goodies. I make mean shortbread and scones.
Title: Re: Press Recommendations
Post by: turnedlight on October 23, 2008, 04:13:08 PM
I think straight sided lentils are easier still than lentils! I think the nugget is the easiest though, as it has a thicker amount of glass over the hole, so you don't get so many problems with it being even when the glass squeezes towards the holes. That's just me though! :)