Frit-Happens !

Lampwork => Lampworking Tip n Tricks => Topic started by: flowerjasper on September 28, 2008, 09:00:34 PM

Title: silver cores for 5mm mandrel beads
Post by: flowerjasper on September 28, 2008, 09:00:34 PM
having been reading the bighole bead swapthread i see that the size of core isnt necessarily the size of the mandrel,
i am using a 5mm mandrel what size core should i get?
i know they are cheap and cheerful but the ones from palmers metals are calling but i want to make sure i get the right ones,
help please people!
sandy x
Title: Re: silver cores for 5mm mandrel beads
Post by: Donna@Rockin' Beads on September 29, 2008, 08:44:42 AM
I bought the 5mm ones from Palmer's for my 5mm mandrel and they fit fine. I've had one fall out so far but will make sure I clean them up properly (as per another thread where acetone was recommended, I think :)) before gluing.
Title: Re: silver cores for 5mm mandrel beads
Post by: GoodMonkey on September 29, 2008, 04:06:24 PM
Sandy, if you PM me your address I'll pop a couple in the post for you so you can try before you buy  ;D
Title: Re: silver cores for 5mm mandrel beads
Post by: Ine on October 28, 2008, 06:55:48 AM
Hi everyone, I'm rather new on this forum, and read about Palmer's in this topic, can anyone give me the website adress of this company? I'm looking for the silvercores as well,

thanks in advance,

Inez
Title: Re: silver cores for 5mm mandrel beads
Post by: Maria Louisa on October 28, 2008, 07:12:18 AM
Inez,
You can get silver cores at www.allbeads4you.nl and www.ayutrade.nl too.
I don't know the Palmer's address.
Title: Re: silver cores for 5mm mandrel beads
Post by: dinah46 on October 28, 2008, 07:35:06 AM
www.palmermetals.co.uk/

:) :)
Title: Re: silver cores for 5mm mandrel beads
Post by: flowerjasper on October 28, 2008, 09:44:03 AM
they are great for the beading chain as well  ;)
Title: Re: silver cores for 5mm mandrel beads
Post by: Flyingcheesetoastie on November 20, 2008, 07:07:47 PM
Okies, I've been asked to make some special silver core beads and am gonna ask an obvious question that's probably on here somewhere else but this looked like a good thread!  Do I make the beady on the mandrel, take it off and glue the rivet/grommet thingy in either side?  Or is there another way of doing it?  I know I'm sposed to know these things but I'm only doing this as a favour for someone who wants a tartan 'pandora' bead...

Ta in advance,

Rachel x
Title: Re: silver cores for 5mm mandrel beads
Post by: flowerjasper on November 21, 2008, 10:08:33 AM
yep, make the bead on a 5mm mandrel, aneal, clean and stick them in!
Title: Re: silver cores for 5mm mandrel beads
Post by: Flyingcheesetoastie on November 24, 2008, 09:18:43 AM
Thankd for that, does anyone know if the Palmers grommets/rivets are stamped 925?  If not, does anyone know where you can get stamped silver grommets?

Thanks guys, hopefully pictures to follow once I get the mandrels too!
Title: Re: silver cores for 5mm mandrel beads
Post by: TiaraHelen on November 24, 2008, 12:01:07 PM
Palmers not stamped, allbeads4you definitely stamped.  Allbeads4you is in holland but the postage is really really cheap and their rivets are about 40p each.  Palmers are cheaper and flimsier. Haven't tried ayutrade cos can't make sense of website...  Can't remember whether Martin's rivets are stamped.
Title: Re: silver cores for 5mm mandrel beads
Post by: turnedlight on November 24, 2008, 06:07:27 PM
I like the allbeads4u ones best too!
Title: Re: silver cores for 5mm mandrel beads
Post by: littlegiggles on November 24, 2008, 06:28:46 PM
just as an observation they arent hallmarked... they are stamped 925. 

To hallmark something you need to send it to an assay office in the UK which stamps initals of the maker, the venue where the metal quality was tested and the year it was tested
Title: Re: silver cores for 5mm mandrel beads
Post by: Flyingcheesetoastie on November 25, 2008, 09:58:06 AM
Thanks for the info guys, have ordered a little test parcel from Holland!

I know they don't have a maker's mark but I still like my Sterling to be marked 925, its more of a perception thing, hopefully it shows your average bod who picks it up that they're not just getting plate!
Title: Re: silver cores for 5mm mandrel beads
Post by: mizgeorge on November 25, 2008, 10:23:29 AM
Quote from: Flyingcheesetoastie on November 25, 2008, 09:58:06 AM
Thanks for the info guys, have ordered a little test parcel from Holland!

I know they don't have a maker's mark but I still like my Sterling to be marked 925, its more of a perception thing, hopefully it shows your average bod who picks it up that they're not just getting plate!

I wish it did! There's loads of crap being imported from China at the moment with 925 marks that's no more sterling silver than my fluffy bunny slippers are.

You can buy a 925 punch on ebay for a couple of quid...
Title: Re: silver cores for 5mm mandrel beads
Post by: Flyingcheesetoastie on November 27, 2008, 10:16:25 PM
My rivets arrived yesterday and I'm very pleased with them, they are quite substantial without being too bulky an addition to a bead and have been finished off very well.

As I work in a bead shop, I have compared them to the ones in the cheap end silver core beads we sell, inported from China, and can confirm that these are much better quality.

My boss has also says she has a 925 stamp, but I think I'd end up bashing the crap out of unstamped thinner rivets so am quite happy to pay 40p odd for these ones.
Title: Re: silver cores for 5mm mandrel beads
Post by: tish on June 10, 2012, 12:52:24 PM
which ones would i order for beads made on 5mm mandrels at this site  http://www.allbeads4you.nl/index.php?item=pandora-style-beadcores&action=page&group_id=70&lang=EN its a tad confusing
Title: Re: silver cores for 5mm mandrel beads
Post by: Glyn Burton on June 10, 2012, 04:45:01 PM
Palmers offer a choice,you can buy them plain or stamped 925 and I think if memory serves they are the same price.
Title: Re: silver cores for 5mm mandrel beads
Post by: turnedlight on June 10, 2012, 05:30:46 PM
I find the palmers ones a bit too lightweight, its a shame cos I would buy theirs if they were as good.
I'd send an email asking which size you need from allbeads, she's very helpful.
Title: Re: silver cores for 5mm mandrel beads
Post by: tish on June 11, 2012, 09:35:49 AM
palmers dont tk paypal i tried using them but couldnt pay
Title: Re: silver cores for 5mm mandrel beads
Post by: Princess Peggy (Priscilla McGirr) on June 11, 2012, 10:22:25 AM
Tuffnells ones are stamped and fit the big hole mandrel which they also sell.