Frit-Happens !

Lampwork => COE 104 => Topic started by: bubblefizz on August 15, 2008, 11:47:44 AM

Title: using transp & dicroich = cracks?
Post by: bubblefizz on August 15, 2008, 11:47:44 AM
I had some pieces of dicroich glass (104) i used transparent glass as a base and then encased the whole bead in clear and its cracked  :'( i was really pleased with it aswell :-\ it was a nugget shaped bead also i batch anneal my work,could it be the size of the bead? even though i tried to keep it small it seems inpossible with the thickness of the dicroich then encasing
any tips on using it?
Title: Re: using transp & dicroich = cracks?
Post by: beads-on-toast on August 15, 2008, 12:06:57 PM
have you got a picture?

might be TOO stressed being dichro and pressed
Title: Re: using transp & dicroich = cracks?
Post by: bubblefizz on August 15, 2008, 12:36:01 PM
here it is sorry bout the awful pic  ;)

(http://img.photobucket.com/albums/v135/bubblefizz/Dscn4479.jpg)
Title: Re: using transp & dicroich = cracks?
Post by: Trudi on August 15, 2008, 12:45:04 PM
Ohh that's a shame - very pretty beads!!
Title: Re: using transp & dicroich = cracks?
Post by: turquoise on August 15, 2008, 12:50:12 PM
oh what a pain in the neck, they looked like lovely beads too. I hope this problem gets sorted out.  ??? ???
Title: Re: using transp & dicroich = cracks?
Post by: dinah46 on August 15, 2008, 12:54:36 PM
Mm! I just posted in this thread and it's vanished ???

I've had similar cracking problems with dichro encasing trans. The only dichro bead of mine that survived was the barbie bling example from Sarah's think pink tut possibly either because it was super heated and swirled or because it was 2 separate pieces ie. not encasing

I find the dichro to be a lot stiffer glass than the 104 rods
Title: Re: using transp & dicroich = cracks?
Post by: beads-on-toast on August 15, 2008, 01:00:05 PM
they look like compatability cracks as opposed to thermal, but i may be wrong

are you using sheet dichro? i only use pre fused but i know a lot of artisits who use sheet with success.

are you sure the COE are the same?

are you encasing with Lauscha?
Title: Re: using transp & dicroich = cracks?
Post by: Vicki on August 15, 2008, 01:06:59 PM
Aw, they were gorgeous :'(
Title: Re: using transp & dicroich = cracks?
Post by: garishglobes on August 15, 2008, 01:18:01 PM
That is a shame, they did look pretty.
I agree, they look like compatibility cracks. I think thermal cracks are usually straight, and often cut the bead in half?
I too have had problems encasing dichro glass with transparent, though it is usually ok provided I don't use too much at a go.
Title: Re: using transp & dicroich = cracks?
Post by: Donna@Rockin' Beads on August 15, 2008, 01:20:09 PM
I had cracks in some of my early big encased beads which I put down to not melting the clear in enough. I have only made 3 dichroic beads but they are fine. I reckon it might be that you are not melting the clear fully - IMHO  :)
Title: Re: using transp & dicroich = cracks?
Post by: beads-on-toast on August 15, 2008, 01:56:53 PM
it could be getting an even heat within the bead too.

When i use dichroic i make sure the encasement layer and the dichro are heated to the same temperature to ensure they gel together so that the two layers do not keep seperate at different temps.

does this make any sense?
Title: Re: using transp & dicroich = cracks?
Post by: beadysam on August 15, 2008, 02:16:05 PM
Looks like incompatability to me!  I've had the same problem recently with some Lauscha I used, only where the Lauscha is the bead has cracked. This is also exactly the same patttern of cracking I had between different colours of P&T glass.  Are you sure your dichro is 104coe?
Title: Re: using transp & dicroich = cracks?
Post by: dinah46 on August 15, 2008, 02:40:57 PM
Are there issues with using Lauscha with dichro then?
Title: Re: using transp & dicroich = cracks?
Post by: beadysam on August 15, 2008, 03:02:06 PM
No, no! Sorry, I didn't make myself at all clear did I? :-[  No, I used some coloured Lauscha in a bead with some vetro or moretti glass and just where the Lauscha was, I got incompatability cracks - the Lauscha was incompatable with the base glass and it caused the same sort of pattern of cracking as seen in the piccy of the dichro bead.  The same colour of Lauscha wasn't very compatable with anything though, all of the other beads I made with it cracked too - no great loss though, it isn't the easiest colour to wear.  :-\
Title: Re: using transp & dicroich = cracks?
Post by: bubblefizz on August 15, 2008, 05:12:25 PM
I cant be 100% its 104 i know i have some other but its black based and that said 104
but yea maybe this one isnt ???
Title: Re: using transp & dicroich = cracks?
Post by: silverlemon on August 16, 2008, 12:08:46 AM
Hi ya.

These look like compatibility cracks.
I do a lot of dichro, and the only time I ever got this effect, of the crazing glass was when I accidentaly combined a 94 coe dichro with Efettre or vise versa, anyways, the encasing peeled off and crazed. It's a great example to show my students what incompatibility looks like!

I always work into the kiln when I use dichro, as you're dealing with a layer of metal (the colour on the sheet) which has a different coe from the glass. It could be that the different coe of the metallic layer on the dichroic glass has caused the cracking, and that annealing as you go would solve the problem rather than batch annealing.

I have never had a problem with encasing using clear glass, however much I use, but I use Bullseye with my dichro as i prefer the colours in the 94 range. I use sheet that I cut, rather than the pre-fused stuff. (ie I don't use Effetre with Effetre dichro, but Uroburos or Bullseye Dichro with Bullseye)

Let us know how you get on.
Title: Re: using transp & dicroich = cracks?
Post by: bubblefizz on August 16, 2008, 10:00:13 AM
thanks sarah for the info!
Ive just got some more dicro this time its defo is 104  ::)
will i be ok encasing with lauscha?
Title: Re: using transp & dicroich = cracks?
Post by: Redhotsal on August 16, 2008, 03:19:12 PM
Angie - I should try a test bead with each of the clears you have - (if you have several). I've found 104 Dichro is fine with Effetre/Vetrofond. Not actually tried it with anything else as I don't do a lot of dichro, but I agree with the others that looks like some sort of incompatibility.

Yes, using dichro can make the bead bigger and bigger however, the clear dichro can be used in such a way that the clear base it sits on can actually be the encasing. Didn't explain that very well - but to be honest this was a real Eureka moment (or Duh! what an idiot I am moment for me). Normally, I would wrap a base of clear then lay the dichro over the top (shiny side out) and then try and encase that again. Much easier and smaller to make the first wrap and then lay the dichro over it with the shiny side in. It encases itself this way and is much smaller. Hope that makes sense.

Shame it has happened - they were beautiful beads  :(

Modified this to say: I am quite willing to believe that I am the only beadmaker in the world not to realise the self-encasing properties of clear dichro - but if any one else wants to own up to this aswell please feel free so that I am not lonely  ;D
Title: Re: using transp & dicroich = cracks?
Post by: bubblefizz on August 16, 2008, 10:37:14 PM
I got ya Sal  :D i dont have any other clear i only have lauscha  :-[
im finding it a struggle using dicro but i know it needs ppp  ::)