Frit-Happens !

Lampwork => COE 104 => Topic started by: flowerjasper on February 13, 2008, 04:34:43 PM

Title: red copper green
Post by: flowerjasper on February 13, 2008, 04:34:43 PM
i have been on glassworks and seen that Q has Red copper green, whats this like?
do i stand a chance with copper green or black nebula  on a hot head?
sandy
Title: Re: red copper green
Post by: Mary on February 13, 2008, 04:59:10 PM
Red copper green is a pretty terracotta colour. It goes back to minty green under some conditions, sometimes you'll get a mix of both colours, and it goes pink under clear. The red is the reduced colour, so you should be fine on a HH. Ordinary copper green might go reddish or silvery for you, but I like it like that too.
Title: Re: red copper green
Post by: Shirley on February 13, 2008, 05:41:38 PM
Ordinary copper green is wonderful on a hothead. Just about my favourite actually. Enjoy playing! :)
Title: Re: red copper green
Post by: *rowanberry* on February 13, 2008, 05:51:44 PM
Oh I LOVE red copper green! Try some silver blue frit with it - woooooooooah!
Title: Re: red copper green
Post by: flowerjasper on February 13, 2008, 09:21:25 PM
thanks ladies,
some of each me thinks!!
anything else you recommend for hot head??
been having fun with twisties this week, love the depth you get with clear
s x
Title: Re: red copper green
Post by: mariag on February 13, 2008, 09:27:44 PM
Quote from: *rowanberry* on February 13, 2008, 05:51:44 PM
Oh I LOVE red copper green! Try some silver blue frit with it - woooooooooah!
I second what Claire said......I got some lovely beads using this combo ;D
Title: Re: red copper green
Post by: Mary on February 13, 2008, 09:59:59 PM
Dark silver plum is good on a Hot Head too!
Title: Re: red copper green
Post by: Shirley on February 13, 2008, 10:05:44 PM
I use tons of silver leaf - base bead, wrap with leaf, burn in and then roll in frit. You can get some great silver effects.

Title: Re: red copper green
Post by: flowerjasper on March 08, 2008, 10:41:03 PM
 ;D
took your advice ladies, red copper green with silver blue frit, looked pretty,
but what a difference when they came out of the kiln,
beautiful deep pink, sooo pleased i had done a set of 8,
any other great combos ??
sandy xx
Title: Re: red copper green
Post by: dinah46 on March 09, 2008, 09:04:28 AM
Quote from: flowerjasper on March 08, 2008, 10:41:03 PM
;D
took your advice ladies, red copper green with silver blue frit, looked pretty,
but what a difference when they came out of the kiln,
beautiful deep pink, sooo pleased i had done a set of 8,
any other great combos ??
sandy xx

Sandy, I tried this a couple of weeks ago and the result was a bit blah, did you put your beads straight into the kiln? I batch annealed so I'm wondering if that makes a difference. ???
Title: Re: red copper green
Post by: Les on March 09, 2008, 10:11:21 AM
Did you get any problems with a dull greyish surface on the beads ?? Sometimes the turquoises and copper greens come out looking a bit manky. This can be resolved by soaking the annealed beads in coca cola over night ... I think some other bathroom cleaning products can do the same job too....

Twas just a thought....

xx
Title: Re: red copper green
Post by: glassworks on March 09, 2008, 10:38:04 AM
yep, that'll be my advice too - the colours can devitrify on the surface, and the coke "eats" that up!!..

;)
Title: Re: red copper green
Post by: dinah46 on March 09, 2008, 11:47:35 AM
OK - just searched the fugly pot for it and dunked it in cola. I'll have another bash with the combo, thanks Les and Q.

I do love red copper green on ivory though.
Title: Re: red copper green
Post by: flowerjasper on March 09, 2008, 06:40:15 PM
here are the beads, totally different than when they went in the kiln, they were batch annealed,
odd pic but the light was fading, i hope it shows the colours,
(http://i251.photobucket.com/albums/gg313/flowerjasper/redcoppergreen002.jpg)
Title: Re: red copper green
Post by: Katiequiggle on March 10, 2008, 06:53:56 PM
OOOh nice,  love the colours in there.
Title: Re: red copper green
Post by: June on March 10, 2008, 07:07:13 PM
Must find my rod and give this a go!  Thanks  ;D
Title: Re: red copper green
Post by: Jolene on March 11, 2008, 02:53:54 AM
Sandy, I stumbled upon this and thought you might like to see it http://www.phoenixartsupplies.com/red-copper-green.php

Jo x
Title: Re: red copper green
Post by: flowerjasper on March 11, 2008, 11:14:24 PM
wow jo,
my rods look pink, if i make a bead they are pale green, if i put those beads in the kiln they come out pink,
maybe i have copper green not red copper green,
not complaining nice beads !
sandy xx
Title: Re: red copper green
Post by: Jolene on March 11, 2008, 11:20:29 PM
Maybe you could try them out in a more reducing flame? I have some "red" looking red copper green rods that I got recently from tuffnels, do you want to trade a couple?

Jo x
Title: Re: red copper green
Post by: flowerjasper on March 11, 2008, 11:28:21 PM
hi hun,
think we have rods from the same batch!
mine were from martin .
do you think those beads i made should have changed so much in the kiln?
sandy x
Title: Re: red copper green
Post by: Jolene on March 11, 2008, 11:48:08 PM
Could be the same batch then if our came from the same supplier. I got mine early November last year but it doesn't look pinkish at all.

In all honesty I haven't tried the red copper green out yet and don't know if it will kiln strike at all. I am itching to see the pics of your beads  ;D
Title: Re: red copper green
Post by: flowerjasper on March 11, 2008, 11:52:54 PM
hope we get good light tomorrow and i will post a pic,
am hoping to put them and a few others on ebay  , first ones ever!  keep putting it off..
s  x
Title: Re: red copper green
Post by: Jolene on March 11, 2008, 11:57:36 PM
Fingers crossed for ya Hon xx
Title: Re: red copper green
Post by: catriona on March 12, 2008, 12:05:21 AM
I got red copper green from martin too 5 rods were red and 1 was green  ::) ;D
just to confuse you .
i have tryed both and still got poo i tryed it with raku frit as i didnt have silver blue frit .
xxcatxx