Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Torches => Topic started by: dangerousbead on February 12, 2008, 03:10:41 PM

Title: hothead bulk fuel HELP
Post by: dangerousbead on February 12, 2008, 03:10:41 PM
Could someone please post a photo of how to support the hothead when it's attached to a bulk fuel supply? Just got the kit from Martin and I can't see how to mount the head, whereas before the gas cannister was attached to the bench by a clamp, angle iron and a jubilee clip. am I being dim?
Title: Re: hothead bulk fuel HELP
Post by: Sarah on February 12, 2008, 03:16:43 PM
Hi

Does this help? Scroll down through the first couple of pictures - I don't think it matters whether you have a creation station or not in terms of attaching it  :)

http://www.frit-happens.co.uk/forum/index.php?topic=1795.0
Title: Re: hothead bulk fuel HELP
Post by: garishglobes on February 12, 2008, 03:27:36 PM
If it's any help, I clamped mine to the bench with a bench vice - just kind of clamped the base of the hothead in place with the top of the vice. It wasn't just a G-clamp, it was a heavy vice for holding bits of wood in place on a worktop. I just slotted it in the side somehow. It wasn't exactly space lab stuff, but as long as the torch isn't moving I don't think that matters!

Title: Re: hothead bulk fuel HELP
Post by: Lush! on February 12, 2008, 03:28:52 PM
I've still got this available ...

http://www.frit-happens.co.uk/forum/index.php?topic=3867.0 (http://www.frit-happens.co.uk/forum/index.php?topic=3867.0)
Title: Re: hothead bulk fuel HELP
Post by: June on February 12, 2008, 04:37:00 PM
That's how ours is attached, too, to the clamp which is screwed down to a big piece of chipboard that we then put onto the table (perfectly portable !!)  and we got the quick release couplings so it can be moved about ;D  We have also pulled the front piece out a bit which makes the HH more horizontal. 
Title: Re: hothead bulk fuel HELP
Post by: sparrow on February 12, 2008, 04:40:30 PM
Ignore the mess and that's not me (it's my sister), but does this help?

(http://farm3.static.flickr.com/2394/2260140557_48a933f9f7.jpg)
Title: Re: hothead bulk fuel HELP
Post by: June on February 12, 2008, 04:52:31 PM
Sabine - How did your sister get on, by the way?  Is there another convert? !!  ;D
Title: Re: hothead bulk fuel HELP
Post by: BeadyBugs on February 12, 2008, 04:58:25 PM
Hi Jane,

You basically use the same set up as with the MAPP canister, just use a smaller jubilee clip around the base of your torch instead, as the piccies above, or this one shows.

HP x

(https://i.ibb.co/mJzBtVP/bulkbenchclamp1.jpg)
Title: Re: hothead bulk fuel HELP
Post by: sparrow on February 12, 2008, 05:01:01 PM
June, she's got a couple of expensive hobbies already (sailing!!), so I think she's trying to resist  ;D
Title: Re: hothead bulk fuel HELP
Post by: June on February 12, 2008, 05:02:29 PM
Quote from: sparrow on February 12, 2008, 05:01:01 PM
June, she's got a couple of expensive hobbies already (sailing!!), so I think she's trying to resist  ;D
Would imagine it's a bit difficult making beads whilst sailing !!   ;D
Title: Re: hothead bulk fuel HELP
Post by: Vicki on February 12, 2008, 05:02:59 PM
I love sailing, but its not expensive for me, just my dad ;D
Title: Re: hothead bulk fuel HELP
Post by: Kaz on February 12, 2008, 05:42:49 PM
We are beading, we are beading....
Home again, 'cross the sea.....
Title: Re: hothead bulk fuel HELP
Post by: dangerousbead on February 13, 2008, 02:04:35 PM
Thanks everyone, I've a better idea now, particularly from Helen's photo, cheers Helen.
I've been thrown a bit as my hothead doesn't look like any of these, not as elegant and slim looking, it came from America so maybe that's why.
Title: Re: hothead bulk fuel HELP
Post by: dangerousbead on February 13, 2008, 02:05:47 PM
Sparrow what have you got your rods stored in?, that looks neat.
Title: Re: hothead bulk fuel HELP
Post by: sparrow on February 13, 2008, 02:13:17 PM
Pipes from Wickes, sawn down to size and taped together - not at all neat in real life, LOL  ;D
Title: Re: hothead bulk fuel HELP
Post by: Sal on February 13, 2008, 04:20:47 PM
Quote from: sparrow on February 13, 2008, 02:13:17 PM
Pipes from Wickes, sawn down to size and taped together - not at all neat in real life, LOL  ;D

Cheaper than buying pipes (free in fact!)-go to your local cinema and ask for any cardboard poster tubes they've got lying around-mine was really pleased to get rid of them  ;D I just got DH to cut the length down a little so they fitted the space I've got better. Not the most high-tech but it works!  ;D ;D
Title: Re: hothead bulk fuel HELP
Post by: June on February 13, 2008, 06:24:39 PM
We've got our glass in a frame made with two shelves of a shoe rack with criss cross struts and DH put a frame work between and it works great - but I guess you could use one of those wooden wine racks if the gap between the ends was the right distance?  ;D   
Title: Re: hothead bulk fuel HELP
Post by: Kaz on February 13, 2008, 10:41:22 PM
I got a wood and metal wine rack from Habitat which is dead sturdy and stood away from the wall it is able to accommodate Martin's longer rods.
Kaz
Title: Re: hothead bulk fuel HELP
Post by: dangerousbead on February 14, 2008, 09:54:32 AM
  :D mine's all in pretty biscuit tins and old vases. There's nowhere to put flowers anymore, so it's a pity but all those bouquets that arrived this morning ..................I had to send them back :P
Title: Re: hothead bulk fuel HELP
Post by: dangerousbead on February 14, 2008, 04:45:40 PM
Right, I've spent the whole day annoying Martin and to-ing and fro-ing the camping gas place and finally persuaded them to sell me the correct gas, (liquid propane in an orange/red container, like for BBQs)I've wrestled with the jubilee clips and got this bulk fuel hothead rig set up but... it's really slow, am I doing something wrong? I only need to turn the regulator about half a turn to get a half decent gas flow, if I open it any further the glass melts but nowhere near hot enough to stick to a mandrel. This is going to bug me. Perhaps I should've gone staight to a bench torch proper and learned to live in the shed. Also when I release the quick release connector it goes PAFF - alarmingly. Any hints from you beautiful people please?
Title: Re: hothead bulk fuel HELP
Post by: Sal on February 14, 2008, 05:04:42 PM
Not sure about parts of your problem but I can help with the quick release bit. I always leave my torch turned on (lit) and turn off the gas at the bottle. I let the gas burn out of the hose-this apparently helps to protect your hose as well as the gas can degrade the hose over time. Once the flame has gone out and the gas has stopped coming through completely I turn off my torch and diconnect the quick release. That way there is no noise  ;D
Title: Re: hothead bulk fuel HELP
Post by: Bluebottle on March 16, 2008, 03:12:20 PM
Quote from: dangerousbead on February 14, 2008, 04:45:40 PM
Right, I've spent the whole day annoying Martin and to-ing and fro-ing the camping gas place and finally persuaded them to sell me the correct gas, (liquid propane in an orange/red container, like for BBQs)I've wrestled with the jubilee clips and got this bulk fuel hothead rig set up but... it's really slow, am I doing something wrong? I only need to turn the regulator about half a turn to get a half decent gas flow, if I open it any further the glass melts but nowhere near hot enough to stick to a mandrel. This is going to bug me. Perhaps I should've gone staight to a bench torch proper and learned to live in the shed. Also when I release the quick release connector it goes PAFF - alarmingly. Any hints from you beautiful people please?

You've probably got the wrong regulator the one you need is a "high pressure one" you don't need a quick release with a propane set up except to add more complications  ::) ::)
Title: Re: hothead bulk fuel HELP
Post by: dangerousbead on March 16, 2008, 06:01:08 PM
Quote from: Bluebottle on March 16, 2008, 03:12:20 PM
Quote from: dangerousbead on February 14, 2008, 04:45:40 PM
Right, I've spent the whole day annoying Martin and to-ing and fro-ing the camping gas place and finally persuaded them to sell me the correct gas, (liquid propane in an orange/red container, like for BBQs)I've wrestled with the jubilee clips and got this bulk fuel hothead rig set up but... it's really slow, am I doing something wrong? I only need to turn the regulator about half a turn to get a half decent gas flow, if I open it any further the glass melts but nowhere near hot enough to stick to a mandrel. This is going to bug me. Perhaps I should've gone staight to a bench torch proper and learned to live in the shed. Also when I release the quick release connector it goes PAFF - alarmingly. Any hints from you beautiful people please?

You've probably got the wrong regulator the one you need is a "high pressure one" you don't need a quick release with a propane set up except to add more complications  ::) ::)

Oh, well I bought the bulk fuel rig as a kit from Martin Tuffnell which is what everyone else seems to have so I assumed that was all correct, I've changed the torch now. Mine was from Fireworks, I now have a proper HH and it works like a dream, but if I have any problems with that I'll reconsider the quick release. It certainly seems a good idea for now as the Propane is outside and I have to hose it in through a window. to just pop out and disconnect it is easy peasy
Thanks for your thoughts anyway
Title: Re: hothead bulk fuel HELP
Post by: Bluebottle on March 16, 2008, 06:06:41 PM
OK I stand corrected   ;D :o ::)

Mike