Frit-Happens !

Lampwork => Common Problems => Topic started by: dangerousbead on February 01, 2008, 02:58:53 PM

Title: Siver cores
Post by: dangerousbead on February 01, 2008, 02:58:53 PM
I've just read an old post regarding silver core beads but it's gone quiet so I'll start a new one, my first post - ta da.  I got some 5mm mandrels from Martin, 4 for a tenner, and some silver cores from allbeads for you, I glued them in which was a bit messy but managed to clean the bead up with some nail varnish remover. The only thing is that the core halves don't meet in the middle, not that that would matter once it's strung but I wonder if it reduces its market value? Anyone have an opinion?
Title: Re: Siver cores
Post by: Billie on February 01, 2008, 03:15:42 PM
Are those the silver core rivets?  I'm not sure how many people who are doing silver cores, use them.  I think most are using silver tube and dapping tools.... but I don't know much about silver cores yet so might be wrong  :)
Title: Re: Siver cores
Post by: mizgeorge on February 01, 2008, 04:18:45 PM
As a buyer (and jewellery maker) I have to say that I will not buy the prefabricated core beads (sorry). I think they make often very pretty beads look cheap.

I know making the 'real thing' can result in some casualties, but the end result is completely worth it IMO.

Only my opinion of course!
Title: Re: Siver cores
Post by: dangerousbead on February 01, 2008, 04:35:55 PM
Your opinion is of huge value. Thanks. I'll just use the rivets for practise in that case and save up for the dappers.
Title: Re: Siver cores
Post by: Billie on February 01, 2008, 04:37:43 PM
You can find a tutorial for silver cores here:

http://www.dawnandevan.com/tutorials.htm

HTH  :)
Title: Re: Siver cores
Post by: dangerousbead on February 03, 2008, 10:45:54 PM
Yeah thanks I've seen that already, looks long winded but I guess it's worth the end result.
Title: Re: Siver cores
Post by: turnedlight on February 04, 2008, 06:56:51 AM
I use the cores you bought and I sell them at a lower price at my fairs around here - people are happy with them and to be honest, some would not appreciate the greater craftsmanship and cost of the real thing, unfortunately for me! I am considering getting all the stuff, but I don't think the rivet cores are too shoddy!
I just coat the mandrel once fairly thinly, so that the silver cores can't waggle when they are pushed in, then you get a nice neat look, also, you can make sure that your 'footprint' is the right sort of size so that there's no gap inside..  :)
Title: Re: Siver cores
Post by: dangerousbead on February 05, 2008, 10:55:50 AM
Do you mean you don't clean the bead before you insert the rivets? Do you use glue? I think if there's no adhesive there's nothing to stop the rivet falling out. Anyway, thanks for your feed back, I think although it's probably a far nobler bead that has a "proper" silver core there is nothing wrong with a riveted one as long as it's not passed off as something it's not. I know my customers are just gob smacked that anyone can actually make beads at all - full stop. : )
Title: Re: Siver cores
Post by: turnedlight on February 05, 2008, 04:38:22 PM
Oh no - I do clean them! And they are glued in with very strong, space filling glue - I think it's two part but not sure as my Dad does them  ;)
Title: Re: Siver cores
Post by: turnedlight on February 05, 2008, 04:45:47 PM
Well, I have had a look at some on the market in shops, and some of them are not all that marvellous some are nowhere near the lovely, artisan ones you see by some of the guys on frit happens !
I haven't felt like I'm trying to pass something off.. and mine are only £8 so I'm not trying to pretend they are top of the range, but even so, I think when it's done well, it is perfectly good, and I'm happy with the quality at the price I'm selling at. Also, I mostly sell in person, to local people, so people get a jolly good look and ask me questions, and they know they can come back to me if there were to be any probs..
Title: Re: Siver cores
Post by: dangerousbead on February 07, 2008, 11:06:39 PM
Good for you, Yeah I think honesty is the best policy, if folks don't like it then they don't have to buy it. I've attached (I think) a photo of my first silver core, I think it's ok but not perhaps for the purists out there. Maybe one day when I've sold enough of these I'll be able to buy the gear to do it properly. Thanks for all your help :-*
Title: Re: Siver cores
Post by: turnedlight on February 07, 2008, 11:12:46 PM
Well I think that looks very smart - I like it! :)
Title: Re: Siver cores
Post by: Kaz on February 07, 2008, 11:13:29 PM
I like that!
Kaz
Title: Re: Siver cores
Post by: dangerousbead on February 07, 2008, 11:17:03 PM
Hey Kaz, I just checked out your etsy shop, I live in Alty too! Small world :P
Title: Re: Siver cores
Post by: Kaz on February 07, 2008, 11:58:50 PM
Amazing - that now makes at least three of us! Whereabouts are you? Are you coming to my get together a week on Saturday?
Kaz
Title: Re: Siver cores
Post by: sparrow on February 08, 2008, 06:17:29 AM
I just watched the tutorial and am keen to try......anybody willing to share the measurement of their tubing? It looks great fun!!
Title: Re: Siver cores
Post by: dangerousbead on February 08, 2008, 10:34:36 AM
Kaz - Whatever get together you're having I won't be able to come, unless it's in the day, but have fun any way. Invite me to the next one please.

Sparrow - I don't know about the silver tubing, the silver rivets are available from
www.allbeads4you.com and you need 5mm mandrels
Title: Re: Siver cores
Post by: Kaz on February 08, 2008, 10:49:00 AM
Hiya
Here's a link to the details
http://www.frit-happens.co.uk/forum/index.php?topic=5062.msg91835#msg91835
Kaz
Title: Re: Siver cores
Post by: June on February 08, 2008, 10:49:21 AM
Is this the right link please as I'm getting stuff about gospel choirs ? !!  ;D
Title: Re: Siver cores
Post by: June on February 08, 2008, 10:51:11 AM
www.allbeads4you.com redirects elsewhere and has references to gospel choirs, not Kaz's link  !!  Thanks
Title: Re: Siver cores
Post by: DragonflyLynne on February 08, 2008, 01:22:31 PM
Quote from: dangerousbead on February 07, 2008, 11:17:03 PM
Hey Kaz, I just checked out your etsy shop, I live in Alty too! Small world :P

Small world - Timperley girl here, living in Derbyshire now. The North West contingent is growing! Kaz, is there something in the water in Altrincham, that's at least 3 of you now isn't it?  ;D
Title: Re: Siver cores
Post by: Kaz on February 08, 2008, 01:29:13 PM
3 and possibly 4 (plus someone else I know who would like to have a go), plus one nearby in Knutsford and one in Stretford. Obviously the creative centre of the universe!!!!
Kaz
Title: Re: Siver cores
Post by: dangerousbead on February 08, 2008, 03:23:35 PM
OOPS :-[ Sorry everyone, this is the right link
http://www.allbeads4you.nl
and look at Pandora style beads then click on the pic of a silver core bead on the right of the page.
they were very fast delivery.