Frit-Happens !

Lampwork => Borosilicate => Topic started by: Marcel on December 19, 2013, 02:05:13 PM

Title: Crushed opals
Post by: Marcel on December 19, 2013, 02:05:13 PM
I got some crushed opals and played with it ;)
and made another tealight!

(http://s10.imagestime.com/out.php/i907379_PICT1389.jpg) (http://www.imagestime.com/show.php/907379_PICT1389.jpg.html)

(http://s10.imagestime.com/out.php/i907380_PICT1396.jpg) (http://www.imagestime.com/show.php/907380_PICT1396.jpg.html)

(http://s10.imagestime.com/out.php/i907381_PICT1399.jpg) (http://www.imagestime.com/show.php/907381_PICT1399.jpg.html)
Title: Re: Crushed opals
Post by: garishglobes on December 19, 2013, 02:34:17 PM
Fab!  ;D

How did you get on with the crushed opals? I got a small amount of black a while ago but found that they caused real cracking issues when encased.
Title: Re: Crushed opals
Post by: Marcel on December 19, 2013, 02:42:37 PM

Thank you  ;D
I tube encase the opals ;) and anneal them straight in the kiln make sure to
not to downramp to fast or it can crack! no batch annealing ;)
Title: Re: Crushed opals
Post by: Glassy Lou on December 19, 2013, 03:17:25 PM
Stunning  :o
Title: Re: Crushed opals
Post by: Steampunkglass on December 19, 2013, 06:00:35 PM
Lovely, and great skill to use them too!!!

Interesting to hear about the encasing too, I have trouble with them getting bubbles all over them, even with washing them in meths or acetone before using them, not easy things to get to work and I've not even dared try chips like this yet!
Title: Re: Crushed opals
Post by: Marcel on December 19, 2013, 08:18:56 PM
Thanx  ;D
What i do is take the opal out of the bag and place it in the kiln on
something so you don't get kiln dust heat it up just like you normaly
would when working! prep a tube make sure its clean!
take the opal out of the kiln and drop in warm tubing not cold!!!
or else crack!!!! now gently heat it take your time ;) slowly encase the opal!
when it is done garage it in the kiln for when you need to put it in some of your art ;)
mostly with to much heat a haze appear or micro bubbles !
i hope this helpes?
it was trial and error for me too  ::)
Title: Re: Crushed opals
Post by: Steampunkglass on December 19, 2013, 09:16:16 PM
Ah!!!  ;D ;D ;D ;D Thank you for the tips, never though of pre-warming them, and I think I must be getting them too hot as I've often had the micro-bubbles coating them and making them look less than clear. I need to practise a lot more before I can come close to making anything even a quarter as sensational as your work!!!  ;D ;D ;D
Title: Re: Crushed opals
Post by: Skyblue on December 19, 2013, 09:45:25 PM
Marcel that is one gorgeous bear :)
Title: Re: Crushed opals
Post by: Lyn G on December 19, 2013, 10:09:01 PM

That is the most beautiful bear, Marcel.....and I especially love opals because they are my birthstone.   ;) ;)

Title: Re: Crushed opals
Post by: ROC on December 19, 2013, 10:39:39 PM
You're far more patient than I am, Marcel, but the results are fantastic, and well worth it!  Beautiful!!
Title: Re: Crushed opals
Post by: flame n fuse on December 19, 2013, 11:08:50 PM
beautiful, you have a real talent for this!
Title: Re: Crushed opals
Post by: jammie on December 20, 2013, 12:25:30 PM
lovely!  :)
Title: Re: Crushed opals
Post by: Skyblue on December 20, 2013, 06:13:54 PM
marcel do you have an etsy page or somewhere you sell your work ?
Title: Re: Crushed opals
Post by: Marcel on December 20, 2013, 06:47:47 PM
Your welcome  ;)
Thank you all for the cool comments :)
i do not have an etsy store i sell my work direct to the collector
or to say in other words is you see something you can message me ;)
Title: Re: Crushed opals
Post by: MeadMoon on December 21, 2013, 09:05:37 AM
Wow!  Your work is stunning.