Anyone know how thick my hosing has to be tuffnell sell 6mm the shop I'm looking at does 4.5 is that wide enough?
Hi,
I have Nortell setup and bought 8.3 mm high pressure hose calor seem expensive. Have a look at Hamilton Gas Products WWW.gasproducts.co.uk
5 metres cost me £6.50 ex vat. It was a while ago but they were the cheapest I could find at the time and the service is good.
Just checked and it hasn't gone up. Heres the link.
http://www.gasproducts.co.uk/cgi-bin/sh000001.pl?REFPAGE=http%3a%2f%2fwww%2egasproducts%2eco%2euk%2fcgi%2dbin%2fss000001%2epl%3fpage%3dsearch%26SS%3dpropane%20hose%26search%2ex%3d0%26search%2ey%3d0%26search%3dACTION%26PR%3d%2d1%26TB%3dA&WD=hose%20propane&PN=copy_of_8%2e3mm_LPG_High_Pressure_Gas_Hose%2ehtml%23a1_21HA132#a1_21HA132 (http://www.gasproducts.co.uk/cgi-bin/sh000001.pl?REFPAGE=http%3a%2f%2fwww%2egasproducts%2eco%2euk%2fcgi%2dbin%2fss000001%2epl%3fpage%3dsearch%26SS%3dpropane%20hose%26search%2ex%3d0%26search%2ey%3d0%26search%3dACTION%26PR%3d%2d1%26TB%3dA&WD=hose%20propane&PN=copy_of_8%2e3mm_LPG_High_Pressure_Gas_Hose%2ehtml%23a1_21HA132#a1_21HA132)
Great thankyou! :)
No Problem,
just check the diameter across the hose fitting on your torch give or take mine is about 9mm. So the 8.3 is fine just takes a bit of pressure to fit it on the torch. Take a look at these also. I use a cheap set of pincers to crimp them. Like the ones on the web page but I think mine are tile ones
http://www.gasproducts.co.uk/acatalog/8.3mm_Single_Ear_Hose_Clip.html (http://www.gasproducts.co.uk/acatalog/8.3mm_Single_Ear_Hose_Clip.html)
Regards
Nick
I changed my piping recently - http://www.frit-happens.co.uk/forum/index.php?topic=41117.msg652908#msg652908