Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Oxycon/Oxygen/Propane => Topic started by: Lush! on October 09, 2007, 02:39:57 PM

Title: Oxycon Help Please
Post by: Lush! on October 09, 2007, 02:39:57 PM
An unexpected knock at the door - and here's my oxycon!  Woohoo!

But ... there's no instructions so I thought I'd better check what goes where before I start fiddling with it.

Oh, and, er, slight problem - its got a two pin plug!  Can I get an adaptor?

Title: Re: Oxycon Help Please
Post by: Mary on October 09, 2007, 03:31:37 PM
Lets get you going! Have you a spare 3-pin plug? Maybe on something you don't use much? I'd think it's best to put on a new plug rather than using an adapter, if you can.

Have you got a green screw-on nozzle, separate or already attached? And clear hose? Attach one end of the hose to the machine via the nozzle, the other end to the barbs on the torch, both ends tightened with o-clips or jubilee clips.
Make sure the torch valve is open when you switch it on (it's not good for the oxy-con to have the torch valve shut for any legth of time). Turn the dial till the floating ball is where you want it for LPM. I set mine about 4.5 so it's not running on max.

Is that clear as mud? Lol!
Title: Re: Oxycon Help Please
Post by: Richard on October 09, 2007, 03:42:17 PM
Make sure the thing runs off 240 volts!!! ;D :D
Title: Re: Oxycon Help Please
Post by: Lush! on October 09, 2007, 03:50:27 PM
Righty-o then.

Yes to a spare plug, well I'm sure my daughter won't notice that her George Formby grill's not working  ;), yes to the green nozzle and plastic hose, only seem to have one teeny jubilee clip though.

The 240 volt bit is a worry ... how do I check?  ::)
Title: Re: Oxycon Help Please
Post by: Lush! on October 09, 2007, 03:52:17 PM
Aha, on the back it says 220-240 volts.  So it is definitely okay to just change the plug, is it?

It won't be earthed I suppose, does that matter?

Title: Re: Oxycon Help Please
Post by: *rowanberry* on October 09, 2007, 03:59:51 PM
I gotta unpack my new oxycon, so I guess i will have to do the same myself :D

Then work out how I feed 2 oxycons into one torch to make it a nice'n'hot torch :D
Title: Re: Oxycon Help Please
Post by: Richard on October 09, 2007, 04:01:16 PM
220-240 Volts is perfect :D
Title: Re: Oxycon Help Please
Post by: Mary on October 09, 2007, 04:01:28 PM
Don't think mine are earthed either.

Probably best to use the clip on the torch end for now, the nozzle will probly be a tight enough fit to stay on and get you going, till you get another. Mine goes on tight enough not to leak, the clip just makes sure it doesn't come loose. If it does come off that end, all that will happen is that you lose your oxy supply to the torch, it's not like bottled oxy under pressure.
Title: Re: Oxycon Help Please
Post by: Mary on October 09, 2007, 04:03:37 PM
Claire, I got a Y connector (I think mine is a propane one?) off e-bay. You'll love it! The hot torch I mean, not the connector.  ;D

Something like this.
http://cgi.ebay.co.uk/NEW-3-WAY-Y-PROPANE-HOSE-CONNECTOR-BRASS-8mm-5-16_W0QQitemZ120167273097QQihZ002QQcategoryZ633QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Title: Re: Oxycon Help Please
Post by: Lush! on October 09, 2007, 04:09:42 PM
Uuuurrgghh!

The flippin plug is one of those moulded-on jobs.  Is it okay to just cut it off? 


Sorry to ask so many questions - I'm being a bit of a girl, aren't I?  :D :D
Title: Re: Oxycon Help Please
Post by: Richard on October 09, 2007, 04:14:16 PM
Just chop the thing off!!

When you trim off the outer covering of the cable make sure you do not cut in the cables underneath!

Have fun ;)
Title: Re: Oxycon Help Please
Post by: Bumpy Beads on October 09, 2007, 05:06:30 PM
Oooerrr.. she's gone a bit quiet....  :-\

Probably busy making beads...  ::)
Title: Re: Oxycon Help Please
Post by: *rowanberry* on October 09, 2007, 05:27:26 PM
Quote from: Mary on October 09, 2007, 04:03:37 PM
Claire, I got a Y connector (I think mine is a propane one?) off e-bay. You'll love it! The hot torch I mean, not the connector.  ;D

Something like this.
http://cgi.ebay.co.uk/NEW-3-WAY-Y-PROPANE-HOSE-CONNECTOR-BRASS-8mm-5-16_W0QQitemZ120167273097QQihZ002QQcategoryZ633QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Cheers Mary!!!!!!! I just got one :D I just need to find a good source of boro now and the money to buy it... but in the mean time with will be boro tubing playing i think :D and just a "ooooooooo isnt this hot" soft glass playing :D
Title: Re: Oxycon Help Please
Post by: Mary on October 09, 2007, 05:36:56 PM
there's a new UK seller on eBay doing boro, Cupcake. And Martin does the clear! I've got a bag of Mr Smiley's shorts  :o want some?
Title: Re: Oxycon Help Please
Post by: Lush! on October 09, 2007, 05:40:30 PM
Quote from: Bumpy Beads on October 09, 2007, 05:06:30 PM
Oooerrr.. she's gone a bit quiet....  :-\

Probably busy making beads...  ::)

Not quite - plug's done though, so I stood and admired my handywork for a bit, then nipped down to Focus for some essential hardware - and as always found myself overwhelmed by all those fascinatingly useful bits of metal and storage ideas...  

I feel a chippy tea coming on, no time for cooking  ;D


Mr Smiley's shorts?   :o

Title: Re: Oxycon Help Please
Post by: *rowanberry* on October 09, 2007, 06:13:04 PM
Oh duh I forgot about cupcake - I got my bullseye from them too! double duh!

Mr Smiley's shorts sound good :D
Title: Re: Oxycon Help Please
Post by: Lush! on October 09, 2007, 09:56:17 PM
Thanks for your help today, Mary and Richard  :D  (oh, and me dad!)

I've just had time for a quick play with my new toys and I'm thrilled - a couple of beads went totally melty on me though before I started to get the hang of all that extra heat .. ooh, the power  ;)

Title: Re: Oxycon Help Please
Post by: Redhotsal on October 09, 2007, 10:18:47 PM
Quote from: Bluebottle_25 on October 09, 2007, 03:50:27 PM
well I'm sure my daughter won't notice that her George Formby grill's not working  ;),

Wow - is it banjo shaped???

How's it going - you , with your fancy oxycon??  ;)
Title: Re: Oxycon Help Please
Post by: Lush! on October 09, 2007, 10:21:40 PM
Quote from: Redhotsal on October 09, 2007, 10:18:47 PM
Quote from: Bluebottle_25 on October 09, 2007, 03:50:27 PM
well I'm sure my daughter won't notice that her George Formby grill's not working  ;),

Wow - is it banjo shaped???

How's it going - you , with your fancy oxycon??  ;)

I not only have a fancy oxycon, and an oddly-shaped bacon buttie maker, I also have a shiny new torch, a kiln on the way and a big fat grin on me face  ;D ;D ;D

Thank you for asking, Sally  ;D
Title: Re: Oxycon Help Please
Post by: Redhotsal on October 09, 2007, 10:51:04 PM
hehehe - that's so cool.
Title: Re: Oxycon Help Please
Post by: glassworks on October 10, 2007, 08:45:41 AM
still in shock i sent out an oxycon with a two pin plug?....  :-[

i'll front you some glass when i get back!!

;)
Title: Re: Oxycon Help Please
Post by: Lush! on October 10, 2007, 09:09:35 AM
 :) :) :)