Frit-Happens !

Fusing and Stained Glass Tips and FAQ's => Fusing Tips and FAQ's => Inclusions & Additions => Topic started by: Sandera on September 29, 2012, 07:20:15 PM

Title: Decals - low fire
Post by: Sandera on September 29, 2012, 07:20:15 PM
Hoping someone can help! I fused my first decal onto my blank (it was an incredibly long and slow firing but that's ok 'cos it seems to have worked fine). I realised that the finished image was going to turn from the rather lovely black to sepia but to be honest I'm a bit disappointed as the black was nicer. Anyone found a way round t
Title: Re: Decals - low fire
Post by: sparrow on September 29, 2012, 08:17:38 PM
Hiya,

there are different types of decals around - the ones that turn to sepia are usually printed with ink jet printers, and not with glass pigments - which should keep their colour. So, I think the problem isn't the firing, but the decal itself....though I might be mistaken :)
Title: Re: Decals - low fire
Post by: Zeldazog on September 29, 2012, 08:51:06 PM
Quote from: sparrow on September 29, 2012, 08:17:38 PM
Hiya,

there are different types of decals around - the ones that turn to sepia are usually printed with ink jet printers, and not with glass pigments - which should keep their colour. So, I think the problem isn't the firing, but the decal itself....though I might be mistaken :)

Nearly right Sabine, its actually laser printers - certain ones have iron (oxide I think) in the pigment, and this is what fuses to the glass - but as you say will always turn the sepia colour - well, I presume this is what has been used.  You can print them at home with special paper and a laser printer/photocopier, or places like Warm Glass do them.



Title: Re: Decals - low fire
Post by: sparrow on September 29, 2012, 08:54:12 PM
Lol, I knew it was one printer or other that people had at home....trust me to get a 50/50 chance wrong :)
Title: Re: Decals - low fire
Post by: Sandera on September 29, 2012, 09:41:38 PM
Quote from: sparrow on September 29, 2012, 08:17:38 PM
Hiya,

there are different types of decals around - the ones that turn to sepia are usually printed with ink jet printers, and not with glass pigments - which should keep their colour. So, I think the problem isn't the firing, but the decal itself....though I might be mistaken :)

That's interesting. So to get black as the final colour I would need to have the decal made as a glass pigment one? I got my photo transferred via the ink jet printer through Warm Glass. Could you point me in the right direction for the glass pigment version? Ever hopeful.....
Title: Re: Decals - low fire
Post by: Flyingcheesetoastie on September 30, 2012, 03:35:07 AM
Are you putting this decal onto a curved surface?  Could it be screen-printed directly onto the glass instead?
Title: Re: Decals - low fire
Post by: sparrow on September 30, 2012, 07:32:18 AM
Try Becky (Chameleon on here)

http://www.etsy.com/shop/chameleonsdesigns :)
Title: Re: Decals - low fire
Post by: Pat from Canvey on September 30, 2012, 08:25:14 AM
This company   http://www.craftycomputerpaper.co.uk/default.aspx?gclid=COHM5N7i3LICFcPHtAodkkkABQ     sells decal paper as well as lots of other types.
Title: Re: Decals - low fire
Post by: Sandera on September 30, 2012, 08:30:38 AM
Quote from: Sandera on September 29, 2012, 09:41:38 PM
Quote from: sparrow on September 29, 2012, 08:17:38 PM

Are you putting this decal onto a curved surface?  Could it be screen-printed directly onto the glass instead?
I'm putting it onto a flat surface (about 15 by 20cm) but i've never done screen printing before and wouldn't know where or how to start. Apparently there's a place in Keighley that has the facilities but i'm guessing I'd need a modicum of knowledge to use them...
Title: Re: Decals - low fire
Post by: Sandera on September 30, 2012, 08:35:29 AM
Quote from: Pat from Canvey on September 30, 2012, 08:25:14 AM
This company   http://www.craftycomputerpaper.co.uk/default.aspx?gclid=COHM5N7i3LICFcPHtAodkkkABQ     sells decal paper as well as lots of other types.

Thanks Sparrow and Pat. I'm off to check those links out!
Title: Re: Decals - low fire
Post by: Flyingcheesetoastie on September 30, 2012, 11:12:57 AM
Ah well, I teach screen printing and its very easy to do, plus set up some stuff yourself and you can change the images on your screen everyday if you wanted!
Title: Re: Decals - low fire
Post by: Sandera on September 30, 2012, 04:19:18 PM
Quote from: Flyingcheesetoastie on September 30, 2012, 11:12:57 AM
Ah well, I teach screen printing and its very easy to do, plus set up some stuff yourself and you can change the images on your screen everyday if you wanted!

I would love to learn as I can see the benefits. Where are you based?
Title: Re: Decals - low fire
Post by: Flyingcheesetoastie on September 30, 2012, 07:31:35 PM
I'm based in Edinburgh, but am actually teaching at a studio in Halifax in a week or so!
Title: Re: Decals - low fire
Post by: Sandera on October 01, 2012, 06:59:49 AM
Quote from: Flyingcheesetoastie on September 30, 2012, 07:31:35 PM
I'm based in Edinburgh, but am actually teaching at a studio in Halifax in a week or so!

I live in Harrogate, so not a million miles away. Could you let me have more details please?
Title: Re: Decals - low fire
Post by: Flyingcheesetoastie on October 01, 2012, 11:15:15 AM
The details are here - http://www.wickedgencrafts.co.uk/index_files/RachelElliot.htm

I think there is space on the Wednesday or the Friday class but booking is with Gen directly.
Title: Re: Decals - low fire
Post by: Yellow friend on October 01, 2012, 03:44:52 PM
Haven't been on for ages and look what happens - my finger slips onto etsy and now looking forward to trying a new technique :) - Just what I needed to get the mojo revved up again.

Shelia