Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Topic started by: Lotti on April 28, 2012, 09:53:50 AM

Title: Seating
Post by: Lotti on April 28, 2012, 09:53:50 AM
What do folks use to sit on in their workshops?  I have an old office chair but the thing to change it's height has died and I am getting serious back ache when using it.  I think I would like something on wheels as my floor is rough and I would need to be able to move my seat often (putting beads in kilns, gettting glass etc etc).  What do other folks use and any good suggestions for where to get something from (cost effective of course as I have spent my planned budget on studio equipment already thsi year - mostly due to the unforeseen purchase of my lovely gazebo!). :) :)
Title: Re: Seating
Post by: SilverGems89 on April 28, 2012, 10:13:11 AM
I just have a cheap computer chair from Argos, height adjustable, on wheels and i find it pretty comfortable even when sitting at the torch for hours at a time  ;D
Title: Re: Seating
Post by: BeeBeads on April 28, 2012, 10:14:33 AM
I use a typists chair - adjustable height, backrest, no arms to get in the way, and most importantly - for me anyway - it's on wheels.
It is so handy to move about on, I can push myself off and glide the length of my studio to get glass etc!  I think the fact that it can be moved about is safer than a static chair because I can quickly move back or to the side to avoid spitting glass!  Contrary to what some folk think, it does not move around when I am working - unless I want it to.  Feet flat on floor and the chair is completely stationary, but if I need to move quickly or just slightly to the side for something then I think it is easier on my joints to have a chair that moves rather than twisting my body to the side.

I would always recommend this type of chair.  I can't imagine working on a static chair or high stool, it's much better to be able to move about!  And it was very reasonable too, less than £25 in Argos!  :D
Title: Re: Seating
Post by: BeeBeads on April 28, 2012, 10:15:24 AM
Hah!  Cross-posted with you Gemma ... great minds think alike!  ;D
Title: Re: Seating
Post by: SilverGems89 on April 28, 2012, 10:15:56 AM
Quote from: BeeBeads on April 28, 2012, 10:15:24 AM
Hah!  Cross-posted with you Gemma ... great minds think alike!  ;D

LOL yep! sounds exactly like mine  ;D
Title: Re: Seating
Post by: Lotti on April 28, 2012, 10:31:30 AM
Sounds like the thing for me.  Will go and have a look.  I know alot of folks use stools but just not sure about them for me anyway.  :)
Title: Re: Seating
Post by: polly put the kettle on on April 28, 2012, 12:00:39 PM
Recycled swivel chair with a wonky wheel from skip at work
replace wheel with prev chairs it's as good as new  ;D

sally
Title: Re: Seating
Post by: lampworklover on April 28, 2012, 12:03:59 PM
Fab leather office chair on wheels with armrests... from Freecycle. Def worth an ask!
Title: Re: Seating
Post by: Pauline on April 28, 2012, 12:57:55 PM
Ikea office chair from their bargains section
I need wheels definately
Title: Re: Seating
Post by: Moreton on April 28, 2012, 01:15:36 PM
Cheap office chair from B&M Bargains. Often called an operators chair in places like Staples. I did have an "Executive/Managers" chair but gave it away as it was far too heavy and bulky. The much lighter operators was better for me. And cheaper, about £15.

Pete
Title: Re: Seating
Post by: firedinglass on April 28, 2012, 02:52:42 PM
Office chair on wheels - wouldn't have anything else now! :)
Title: Re: Seating
Post by: SueP on April 28, 2012, 02:55:21 PM
I don't I always stand  ;D ;D
Title: Re: Seating
Post by: Blue Box Studio on April 28, 2012, 05:56:50 PM
Freecycled gas lift bar stool that swivels, but I work at kitchen unit height.  In the other shedio I have a draughtsman chair, higher than a typing chair, the typing chair was too low for me at the kitchen units I have in there.
Title: Re: Seating
Post by: Katiequiggle on April 28, 2012, 07:22:56 PM
Mine is a pink tweed office chair without arms.  A fiver from Oxfam.  Works fab though the first time I pushed off from my work bench I shot straight out of the double doors at the end of the shed  ;D ;D  Haven't done that again since.
Title: Re: Seating
Post by: kathsd on April 28, 2012, 08:00:04 PM
I always stand too, makes dot placements a challenge !  ;D but not sure what to do when i fit out the shed  ? ???
Title: Re: Seating
Post by: tinker on April 28, 2012, 08:05:11 PM
Well this is timely Lotti, am in need of a new one myself! I got an office chair from Ikea with wheels and the gas adjuatable etc, but the fuuf goes out of it all of a sudden so I can go from seeing over the torch to midget height whilst trying to make beads. Most disconcerting lol.
Title: Re: Seating
Post by: Blue Box Studio on April 28, 2012, 08:35:48 PM
Not sure it's meant to do that Kat!  I got my draughtsman's chair from Viking, had it 5-6 years now and still going strong, despite having to leap up to it as I'm a bit short!
Title: Re: Seating
Post by: Shirley on April 28, 2012, 08:50:05 PM
I got a couple of office chairs from IKEA when i bought my benching last summer. Love them. They have wheels, are adjustable height, swivel and have enough room to be able to put a cushion behind my back so I don't slump too much.
Title: Re: Seating
Post by: dangerousbead on April 28, 2012, 09:08:59 PM
A knackered old french style, possibly antique, the stuffing fallen out of, fabric deteriorating with a couple of old blankets on the seat, wooden armed chair. I love it and one day intend to restore it.
Title: Re: Seating
Post by: Shirl on May 03, 2012, 11:23:37 PM
I use a swivel office chair with arms, and a cushion for padding......and thrown over with a sheepskin rug on the seat and up the backrest, which is warm in winter and cool in summer.....Oh i do like my conforts ;D ;D
Title: Re: Seating
Post by: Nick on May 04, 2012, 12:36:52 AM
Hi,
I use a heavy duty ironing type of stool great size for the shed and comfortable too. It can also be folded flat if I need the space to work on other projects.
Title: Re: Seating
Post by: noora on May 04, 2012, 08:07:50 AM
I bought the cheapest office chair I could find at Ikea :) They seem to have changed it though, when I bought it the seat was slightly padded but now it's plastic. I need the flocked surface of the padded seat, I might slide off a plastic seat when trying to move the chair.
Title: Re: Seating
Post by: Magpie on May 04, 2012, 02:05:31 PM
I work at the kitchen table so use one of the kitchen chairs. No wheels, but you wouldn't believe how fast I can move when hot glass comes shooting in my direction. Having no wheels also means I can have my feet flat on the floor or propped up on something under the table (loads of empty wine bottles at the moment as my mead isn't ready for bottling yet ::)).
Title: Re: Seating
Post by: Sarah9959 on May 08, 2012, 09:23:27 PM
I've got an ergonomic stool type thing that I got in a local charity shop - fantastic, especially as I have a bad back anyway

Sarah
Title: Re: Seating
Post by: Madam Steph on May 08, 2012, 09:46:46 PM
I use one of the foldaway chairs from inside my butterfly table, that holds all my jars full of glass rods  ;D

Linda x