I have been playing with slumping bottles and it is fun even in my small kiln (even a budweiser bottle is too large). I am having a problem removing the glue from the bottles. I soak the bottles and the labels come off ok but there is a residue of glue left behind on some bottles I can remove it but I have an oramorph bottle that does not want to give its glue up. Any ideas would be welcome.
I use a non scratch scourer to get the glue or alcohol. Hope that helps!
Lakeland do a sticky marks remover which is what I use.
WD40 usually works. Or Sticky Stuff remover.
I use a squirt of washing up liquid, a metal scourer and a lot of elbow grease. They do come off eventually. I like the bottles where you soak them and the label comes off nicely and floats away. Unfortunately not all bottles are like that.
Thanks for that. DH has now suggested chewing gum remover which apparently we have. If not will have to find out where he hides the WD40. Kathleen
nail varnish remover ;)
Acetone - available from the chemists.
I was going to suggest Acetone or nail varnish remover (just check that its not an acetone free one!)
I think Methylated spirits is supposed to work as well, but not sure.
Funnily enough I did a search for this a couple of days ago, as we had emptied out some miniature spirits bottles (down the sink unfortunately :o) and I fancied doing some slumping there are some more suggestions here: http://www.frit-happens.co.uk/forum/index.php?topic=5122.15 :)
Yes meths does work ;)
I use one of those scrapers which has a razor blade type thingy in it, so no fumes. A paint scraper type.
White spirit also works just cleaned a load of little herb bottles for Frit ;D
Quote from: Pat from Canvey on January 09, 2012, 07:39:39 AM
, so no fumes.
Good point, Pat. A lot of the chemicals are smelly, but if you go for Acetone, be careful, use it in a well-ventilated room as it can go to your head - if you leave it in a bowl or the lid off, it will evaporate very quickly too, and you're breathing in those fumes.
I have a large bottle of it (acetone) at the studio, its kept in a brown glass bottle in a box, in a drawer (it advises keeping it dark, too!)
Any ideas for getting the writing off the side of a saphire gin bottle ??
A little bit of butter also helps: I put the butter on my finger and then rub the bottle where the glue-residue is. Most times it rubbs off quite easily.
Thanks for that. I should be able to find something in the house that does the job. The link was also useful, I must improve my search skills
Brasso (the wadding one in the tin, not the liquid) works well too!
Re Bombay Saphire bottle. DH has looked and thinks they may be etched if that is any help.
Quote from: nuttybeader on January 09, 2012, 08:02:41 PM
Re Bombay Saphire bottle. DH has looked and thinks they may be etched if that is any help.
Thanks probably a case of not using that part of the bottle when re-cycling into beads.
No, you can, don't worry about not using it. The only part I'd not use again is the bottom, seems to really scum up the beads (which is a bit of a bum as it's really thick glass and you can get lots of beads out of it).
Quote from: Magpie on January 09, 2012, 08:21:51 PM
No, you can, don't worry about not using it. The only part I'd not use again is the bottom, seems to really scum up the beads (which is a bit of a bum as it's really thick glass and you can get lots of beads out of it).
Thanks one day I will get around to trying it but I am only on a hot head. Brother sent me the bombay bottle and I have a couple of dark blue sherry bottles as well.
plus a special champane bottle from a friends wedding, it will be their 30th in a couple of years time and I want to make them something special from the bottle for that.