Frit-Happens !

Lampwork => Lampworking Tip n Tricks => Topic started by: Donna@Rockin' Beads on November 02, 2011, 07:43:39 AM

Title: Cutting down mandrels
Post by: Donna@Rockin' Beads on November 02, 2011, 07:43:39 AM
Forgive me if this has been dealt with somewhere else but I need help...
My dad has produced another fab bead stand which I wanted to put old mandrels into. However, I have no idea what I can use to cut the mandrels.
I have glass rod nippers but didn't want to try them in case I ruined them.
What tool do you guys use to cut mandrels?
Thanks
Title: Re: Cutting down mandrels
Post by: awrylemming on November 02, 2011, 07:49:45 AM
There was a thread somewhere but don't have time to rummage.  If it's skinnies you can use a memory wire cutter.  Beyond that I think somebody said a hacksaw?  Don't quote me on that though ...
Title: Re: Cutting down mandrels
Post by: Lakelady on November 02, 2011, 08:05:02 AM
I think bolt cutters might have been mentioned - I have used an old pair of pliers but it was very, very hard going  :o
Title: Re: Cutting down mandrels
Post by: Hamilton Taylor on November 02, 2011, 08:12:46 AM
bolt cutters work well.

Sean
Title: Re: Cutting down mandrels
Post by: ♥♥Tan♥♥ on November 02, 2011, 08:22:15 AM
Your teeth and determination 8)
Title: Re: Cutting down mandrels
Post by: Donna@Rockin' Beads on November 02, 2011, 09:33:41 AM
Thanks guys. Interesting, Tan  ;D ;D
Title: Re: Cutting down mandrels
Post by: Lakelady on November 02, 2011, 10:50:49 AM
Quote from: ♥♥Tan♥♥ on November 02, 2011, 08:22:15 AM
Your teeth and determination 8)

Tee hee  ;D
Title: Re: Cutting down mandrels
Post by: Blue Box Studio on November 02, 2011, 06:21:20 PM
Someone suggested bolt cutters and put a link to Ebay.  I bought the bolt cutters and the 2.4mm mandrels dented the cutters!  I've had a refund.  I will resort to a hacksaw as soon as I can find my hacksaw.  I'm trying to do the same thing, the rods that came with the Totally Beads bead rack are too long and catch on everything on my table at fairs.
Title: Re: Cutting down mandrels
Post by: Pat from Canvey on November 03, 2011, 07:39:05 AM
I use bolt cutters to cut up welding rods for mandrels. Smooth the ends with Diapad sanding pads,
http://www.tiranti.co.uk/subdivision_product_list.asp?Subcategory=35&Subdivision=97
These pads also work on the ends of beads by the way.
Title: Re: Cutting down mandrels
Post by: ♥♥Tan♥♥ on November 03, 2011, 06:38:25 PM
Quote from: Blue Box Studio on November 02, 2011, 06:21:20 PM
Someone suggested bolt cutters and put a link to Ebay.  I bought the bolt cutters and the 2.4mm mandrels dented the cutters!  I've had a refund.  I will resort to a hacksaw as soon as I can find my hacksaw.  I'm trying to do the same thing, the rods that came with the Totally Beads bead rack are too long and catch on everything on my table at fairs.

That's what you get for buying cheap crap ;D
Title: Re: Cutting down mandrels
Post by: dangerousbead on November 03, 2011, 07:28:30 PM
Tan's teeth. :-)
Title: Re: Cutting down mandrels
Post by: ♥♥Tan♥♥ on November 03, 2011, 07:34:18 PM
Raaaarrrrr
Title: Re: Cutting down mandrels
Post by: firedinglass on November 03, 2011, 10:11:05 PM
Which bolt cutters would you recommend?  they seem to vary hugely in price and size. :-\
Title: Re: Cutting down mandrels
Post by: Blue Box Studio on November 03, 2011, 11:06:48 PM
Quote from: ♥♥Tan♥♥ on November 03, 2011, 06:38:25 PM
Quote from: Blue Box Studio on November 02, 2011, 06:21:20 PM
Someone suggested bolt cutters and put a link to Ebay.  I bought the bolt cutters and the 2.4mm mandrels dented the cutters!  I've had a refund.  I will resort to a hacksaw as soon as I can find my hacksaw.  I'm trying to do the same thing, the rods that came with the Totally Beads bead rack are too long and catch on everything on my table at fairs.

That's what you get for buying cheap crap ;D

Now what makes you think they were cheap?  Granted they were crap!  It seemed to be the going price on Ebay (and we haven't anywhere local to buy this stuff) and I sort of thought they came recommended.
Title: Re: Cutting down mandrels
Post by: Donna@Rockin' Beads on November 04, 2011, 07:36:51 AM
Quote from: Pat from Canvey on November 03, 2011, 07:39:05 AM
I use bolt cutters to cut up welding rods for mandrels. Smooth the ends with Diapad sanding pads,
http://www.tiranti.co.uk/subdivision_product_list.asp?Subcategory=35&Subdivision=97
These pads also work on the ends of beads by the way.

They look interesting. Which grade do you use?
Title: Re: Cutting down mandrels
Post by: Pat from Canvey on November 04, 2011, 08:27:52 AM
I have all three colours but use the black mostly. If you are thinking of buying, buy the black. I got them originally when I was cutting up bottles, but they have lots of other uses. Backs of cabochons if you don't have a flat lap as one example.

Added re tip... if you want to smooth the holes in a bead, using water, put the bead back on a clean mandrel and hold that way. It helps to keep a nice level opening.
Title: Re: Cutting down mandrels
Post by: Rase on November 04, 2011, 08:44:27 AM
I use husband to cut mandrels ... dont know what he does, but he is useful on occasions.
Title: Re: Cutting down mandrels
Post by: Shirl on November 04, 2011, 08:47:10 AM
Quote from: Rase on November 04, 2011, 08:44:27 AM
I use husband to cut mandrels ... dont know what he does, but he is useful on occasions.

Me too :) he uses a hacksaw with a blade for metal
Title: Re: Cutting down mandrels
Post by: Blue Box Studio on November 04, 2011, 09:03:40 AM
Quote from: Shirl on November 04, 2011, 08:47:10 AM
Quote from: Rase on November 04, 2011, 08:44:27 AM
I use husband to cut mandrels ... dont know what he does, but he is useful on occasions.

Me too :) he uses a hacksaw with a blade for metal

There are not enough hacksaw blades in the world for my husband to cut mandrels :(