Print Page - Which kiln???

Title: Which kiln???
Post by: meliom on July 21, 2007, 04:12:48 PM

For some time I have been saving my pennies and looking around for a kiln. Living on an Island usually adds more costs on for delivery and there is nowhere locally to go and have a look at kilns.

I would like a kiln to anneal my beadies, I thought probably one with a bead door would be best, but I would also like to do some fusing. I keep getting drawn to the SC2 with a bead door as it appears to do everything I want. But this is all new to me and what do I know? If you have a bead door does this effect glass fusing?

If anyone has any recommendations or advice before I buy anything it would be appreciated as it is such a big expense?

Thanks
mel

Title: Re: Which kiln???
Post by: meliom on July 21, 2007, 04:37:44 PM

I have just found a thread which answers my questions. I should have looked harder. Sorry.

thanks
mel

Title: Re: Which kiln???
Post by: ♥♥Tan♥♥ on July 21, 2007, 08:22:53 PM

Dont be sorry, we all need to ask questions, there is so much to learn and there are a lot of big expenditures. Good luck with it

Title: Re: Which kiln???
Post by: afina on July 21, 2007, 10:19:04 PM

Hi Mel!
where did you find the thread? Still looking myself...

Title: Re: Which kiln???
Post by: meliom on July 22, 2007, 12:27:30 AM

Hi there

I dont know how to do the link thing. Look under Kiln Doctor on Technical and there is a thread "Help have I made a Mistake". Lots of useful info.

Hope it helps.

mel

Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Kilns => Topic started by: meliom on July 21, 2007, 04:12:48 PM