Frit-Happens !

Lampwork => Lampworking Tip n Tricks => Topic started by: turnedlight on July 02, 2007, 07:31:01 PM

Title: silver wire
Post by: turnedlight on July 02, 2007, 07:31:01 PM
I have been using silver wire, and like the way it looks, but others seem to get the silver into tiny dots, wheras my silver goes into big blobs! I'm using 0.5mm pure silver.. any advice? ???
Title: Re: silver wire
Post by: Caroline on July 02, 2007, 09:36:22 PM
thinner wire or turning the bead quicker while your applying it

i've never used it myself
Title: Re: silver wire
Post by: bubblefizz on July 03, 2007, 07:23:44 PM
I think they use silver mesh, ive tried it and if you heat it in "well", it will form tiny dots  ;D
Title: Re: silver wire
Post by: turnedlight on July 26, 2007, 05:42:56 PM
Thanks- I'm still learning with it.. got some nice dots today, but nasty yellowing around the silver..  :(
Title: Re: silver wire
Post by: bubblefizz on July 28, 2007, 01:14:06 AM
i get the yellow aswell ??? not sure if its supposed to happen or not ::)
Title: Re: silver wire
Post by: Buzzybead on August 17, 2007, 07:05:37 PM
What gauge of wire do you use/ I've tried 24ga. but it burns my fingers as it travels up the wire  :'(
Title: Re: silver wire
Post by: Mary on August 17, 2007, 07:56:36 PM
You'll get yellowing on certain colours, that react with the silver. Pinks and purples particularly. Try testing by putting silver leaf on the colour, you'll see the yellowing more clearly and learn what to avoid.
Title: Re: silver wire
Post by: littlegiggles on August 17, 2007, 10:01:27 PM
silver is such a good conductor of heat you really need to use tweezers to put it on...

heat the glass and the end of the wire and secure it.... wrap the silver around the bead out of the flame then melt in
Title: Re: silver wire
Post by: Buzzybead on August 17, 2007, 11:36:52 PM
Ahh - thanks for that advice Julie. Just in time before I erase my finger prints!!
Title: Re: silver wire
Post by: turnedlight on August 22, 2007, 07:16:08 PM
Think I might have cracked it- thanks for the advice!  :)
Title: Re: silver wire
Post by: Ilona on August 28, 2007, 07:33:41 AM
I am also wanting to get some silver wire, I want it for melting in and also for wrapping, do I need different sizes and what gauge do I need.
Title: Re: silver wire
Post by: turnedlight on August 28, 2007, 09:10:54 AM
I buy it from Palmer Metals- 0.5mm fine silver (sterling etc will not work) but they sell it in 0.3mm in spools. I like the mesh when well melted in, Tuffnells sells that.
Title: Re: silver wire
Post by: Billie on August 28, 2007, 03:02:44 PM
I have the 0.3mm fine silver from Palmer Metals and it's great for melting in.
Title: Re: silver wire
Post by: Ilona on September 09, 2007, 01:36:04 PM
Great! if I order 0.3 fine silver wire for melting in, what grade do I buy for wire wrapping, is it 0.6 round? I need to order this today, so any help with what grades are best used for, would be a help.

Ilona
Title: Re: silver wire
Post by: Lush! on September 09, 2007, 02:00:47 PM
Yep, 0.6 mm works well for wrapping, and 0.8 is a useful size too, nice and sturdy for making dangly bits.  I'd go for sterling rather than fine silver for jewellery making though - maybe that'll keep the cost down a bit?
Title: Re: silver wire
Post by: Ilona on September 12, 2007, 11:00:39 PM
Thanks for the reply.
I am waiting to get my hands on my silver, its sitting at the post office at the moment.

Ilona