Frit-Happens !

Lampwork => Common Problems => Topic started by: DeanWilson on February 08, 2011, 05:59:37 PM

Title: Japanese Annealing Bubbles..?
Post by: DeanWilson on February 08, 2011, 05:59:37 PM
Hey guys, ordered some of these with a tin a while back and was wondering if you pour them out of the bag into the tin or what? Stupid question I know but I'm not sure :P Also, after placing my Tuffnells order I immediately rang them and asked for goldstone and bluestone strips to be added to my order...They said that's fine and they aren't here!! :( :( Was really wanting them too! :(
Title: Re: Japanese Annealing Bubbles..?
Post by: helbels on February 08, 2011, 06:11:30 PM
Hi Dean

Yep, pour them out the bag into the tin, then pop your beads into them as you work.  Make sure they aren't too hot though when you pop them in or you end up with bubble shaped indents all over them.

Shame about the Goldstone - give Tuffnell's a ring and ask them to sort it out for you.

H
Title: Re: Japanese Annealing Bubbles..?
Post by: DeanWilson on February 08, 2011, 06:14:02 PM
That's brilliant thanks, wasn't sure ;D Off to make some now then :P

And I tried to ring Tuffnells a few times about half an hour ago but there was no answer! :( And the stuff looks so pretty too and I'd love to try it :( :P
Title: Re: Japanese Annealing Bubbles..?
Post by: Zeldazog on February 08, 2011, 06:20:18 PM
Quote from: DeanWilson on February 08, 2011, 06:14:02 PM


And I tried to ring Tuffnells a few times about half an hour ago but there was no answer! :(

Hmm, unless you're in a different time zone, half an hour ago would make it quarter to six - they are allowed to close you know (frustrating as it is!)

Try during 'normal' office hours (or email of course).
Title: Re: Japanese Annealing Bubbles..?
Post by: Hazer on February 08, 2011, 06:26:21 PM
Quote from: Zeldazog on February 08, 2011, 06:20:18 PM

they are allowed to close you know (frustrating as it is!)


...they are? I thought they devoted their whole lives to our glassy needs ;)
Title: Re: Japanese Annealing Bubbles..?
Post by: ♥♥Tan♥♥ on February 08, 2011, 06:39:22 PM
They should, I quite often have a glassy question at 3am :D
Title: Re: Japanese Annealing Bubbles..?
Post by: SilverGems89 on February 08, 2011, 06:43:38 PM
LOL Tan, same here!
Im a long time user of annealing bubbles, love the things, wouldnt be without them! make sure all the glow has gone from the bead before you put it in though or like helen said you end up with little dents in the glass (very annoying!) to check the glow really has gone hold the bead in a darkened place (called under the table in my workshop) and you'll see it fade
oh and definately empty them out the bag, or you'll end up with a melty mess!
HTH
Title: Re: Japanese Annealing Bubbles..?
Post by: Hazer on February 08, 2011, 06:48:10 PM
Another tip; don't let non-glassy people near them. They think it's great fun to 'pop' them between their thumb and finger, and then you're left with annealing crumbs.
Title: Re: Japanese Annealing Bubbles..?
Post by: Black Heart Beads on February 08, 2011, 06:59:18 PM
Quote from: Hazer on February 08, 2011, 06:48:10 PM
Another tip; don't let non-glassy people near them. They think it's great fun to 'pop' them between their thumb and finger, and then you're left with annealuing crumbs.

A few glassy people like to do that as well  :-[
Title: Re: Japanese Annealing Bubbles..?
Post by: Hazer on February 08, 2011, 07:00:34 PM
Quote from: Black Heart Beads on February 08, 2011, 06:59:18 PM
Quote from: Hazer on February 08, 2011, 06:48:10 PM
Another tip; don't let non-glassy people near them. They think it's great fun to 'pop' them between their thumb and finger, and then you're left with annealuing crumbs.

A few glassy people like to do that as well  :-[

(shhh, I've popped a lot of mine, and now I need someone else to blame ;) )
Title: Re: Japanese Annealing Bubbles..?
Post by: DeanWilson on February 08, 2011, 07:37:55 PM
Well sooooooor-y Zelda :P Thought they stayed open later, that's all :O

These bubbles are amazing! I love them! They're so clean and...tidy! All contained within that wee box WITHOUT the dangerous fibreglass pieces all over the floor :P

And that is SO true. JUST out of the box and Rory (my brother) goes 'Dean, these break in between your fingers!' I called him a moron and told him to stop...Then went upstairs and did it myself :P ;D Still left with a few though :P

Got some of the pop-in silver rivets...And they don't fit inside my beads! :( :( Made on 5mm mandrels, double dipped :( And it was with a new tub of bead seperator too so they got loads! :O I love this release, it's on Tuffnells- it DRIES in the flame! I'm used to 'air dry me for HOURS or, don't get me wrong I WILL crack off this mandrel!!' it's fab ;D

I also bought an electric bead reamer, it was the BEST £9 I've ever spent ;D HOW MANY times have I stabbed myself with the old manual one? :P It's fab :D And then I filed the edges of the bead down down down quite a bit and they STILL don't fit! They go in about half way then stop and get stuck in and won't come out- I've ruined two rivets having to get them out with my teeth!  >:( Sucks! :(
Title: Re: Japanese Annealing Bubbles..?
Post by: lyzzydee on February 12, 2011, 10:51:29 PM
I am going to order some of these bubbles, but I had in my head that they were going to be like baking beans heavy and grey, mainly I suppose as they come in two kilo bags, which seems very heavy!
Title: Re: Japanese Annealing Bubbles..?
Post by: DeanWilson on February 12, 2011, 10:54:31 PM
Isn't it two litre bags? ??? But really do, they are amazing. I had no idea how they'd work but they're really light and move as soon as the bead is in so you hardly have to use any force at all- they just are fantastic and I really could not be without them :) If you're willing I'd get the tin too- it's £12 total but it's all contained and so tidy! Can't get over it- especially after the messy, dangerous fibre blanket catastrophe :P
Title: Re: Japanese Annealing Bubbles..?
Post by: lyzzydee on February 12, 2011, 11:52:28 PM
Ah, Two litres would make sense!!!!

I will get the tin as well

Can't wait to get started.