Frit-Happens !

Lampwork => Common Problems => Topic started by: Fruddy on January 14, 2011, 10:13:11 PM

Title: Coring Beads.... Aaarrrghhh!
Post by: Fruddy on January 14, 2011, 10:13:11 PM
Okay, so  have spent the best part of this evening, coring beads that I am not really bothered about - they're okay - but I wouldn't sell them - with copper tubing.  cos its cheap, and I don't care if I ruin it, or the bead in the process.

After about 2 manky starts, I have managed to successfully core 4 beads.  Excellent!!

So.

There's one bead that I am REALLY pleased with.  Perfect in shape and size, made with a black base and then layered with DH Gaia, with Aurae poked dots.  Twas a lovely bead.

I cut myself a piece of silver, exactly the right size.  Set it into the bead and set about flaring it in my press.  No probs!

My Jim Moore has two stages.  First, you use the large metal die and anvil to flare the silver, then, swap this for the narrower die to press into the bead and finally, swap the metal die and anvil for plastic ones, which "press" the silver into the sides of the bead, for a perfect fit.  I hasten to add that this process had worked 100% fine in the copper cored manky beads that I had practiced on earlier in the evening.

Everything went fine, until I swapped the steel anvil and die for the plastic ones.  Finishing touches, but as soon as I pressed down......

The BL*ODY BEAD BROKE!!

Could have cried.

Have come in, in disgust.

All that practising with beads that I don't give a monkeys about and then, with the one that I actually WANTED to core, the damn thing breaks!!

Oh well.

There's always tomorrow.

;D

Off to bed now.

Peed off.
Title: Re: Coring Beads.... Aaarrrghhh!
Post by: Margram on January 14, 2011, 11:04:38 PM
That's the pits >:(...
Title: Re: Coring Beads.... Aaarrrghhh!
Post by: julieHB on January 14, 2011, 11:04:53 PM
It's happened to all of us - better luck tomorrow!!  :)
Title: Re: Coring Beads.... Aaarrrghhh!
Post by: JKC on January 14, 2011, 11:27:27 PM
That's a shame, but I'm sure the effort will be worth it in the end.
Title: Re: Coring Beads.... Aaarrrghhh!
Post by: paintboxcrafts on January 15, 2011, 09:34:02 AM
That's pants. Did you anneal your silver first?
Title: Re: Coring Beads.... Aaarrrghhh!
Post by: MangoBeads on January 15, 2011, 10:04:40 AM
oh no !!! in my early days I only successfully cored 5 out of 10 beads a week ! Hope that makes you feel better .... and I still break a few :) Dont give up perseverance WILL reap reward !
Title: Re: Coring Beads.... Aaarrrghhh!
Post by: Shirl on January 18, 2011, 04:30:26 PM
Oh what a pain!

I am not even going to attempt it as it seems so difficult