Frit-Happens !

Lampwork => Common Problems => Topic started by: kibbutzangel on November 13, 2010, 10:39:24 PM

Title: First beads - which colour glass?
Post by: kibbutzangel on November 13, 2010, 10:39:24 PM
I'm hoping to attempt my first bead tomorrow  ;D

I have a pack of assorted rods from Tuffnells, but have no idea which colour would be best to start out with, and whether I should use a 'solid' rod or a 'see through'.  Any advice appreciated, please!
Title: Re: First beads - which colour glass?
Post by: Lush! on November 13, 2010, 10:50:43 PM
Blue is good.  It tends to be a 'what you see is what you get colour' and its easy to read the temperature change as the blue comes back very quickly as the glass cools.  I usually start my students with periwinkle blue for their first few beads.

I'd suggest avoiding white for your first few beads as its very soft and can be hard to control; also I'd avoid anything in the red family (inc oranges, yellow) as they look black until they're cool again.
Title: Re: First beads - which colour glass?
Post by: Redhotsal on November 13, 2010, 10:53:18 PM
They're just all a bit different. Opaque ones tend to be runnier - the runniest are white and ivory. See-through (transparents) are stiffer - the stiffest is probably cobalt blue and so you'll have to heat them up more to get the same degree of "runny-ness".
Some of them will "boil" easily - like yellow, so you'll have to work it higher in the flame.
I usually start students with something about half way between stiff and runny - like periwinkle blue or mid-turquoise - which are both opaques.
The important thing is to just play with the glass - don't over analysis what you're doing, and just have fun.
Exciting!  :D
Title: Re: First beads - which colour glass?
Post by: Lush! on November 13, 2010, 10:55:22 PM
Quote from: Redhotsal on November 13, 2010, 10:53:18 PM

I usually start students with something about half way between stiff and runny - like periwinkle blue

Snap  ;D ;D ;D 

(probably another habit I picked up from you, Sal!)
Title: Re: First beads - which colour glass?
Post by: Redhotsal on November 13, 2010, 10:56:37 PM
we posted at the same time - so great minds think alike.  ::) ;)
Title: Re: First beads - which colour glass?
Post by: kibbutzangel on November 13, 2010, 11:08:22 PM
Excellent!  Thanks ladies, just what I needed.  Just checked and I have a rod of that :D  Oooh, all excited!  I'll post a pic of the first just to give you all a reminiscence lol
Title: Re: First beads - which colour glass?
Post by: Margram on November 14, 2010, 01:13:03 PM
Have fun and don't worry about odd shapes to start with - you'll soon improve as you practise ;D
Title: Re: First beads - which colour glass?
Post by: Blue Box Studio on November 14, 2010, 05:10:08 PM
Quote from: Margram on November 14, 2010, 01:13:03 PM
Have fun and don't worry about odd shapes to start with - you'll soon improve as you practise ;D

You need those odd shaped ones to go in the bottom of the bead release pot so they act as a mixer when you shake it.  Well, that's what I tell myself anyway!  I am evidence that you can fool some of the people all of the time.  ;D
Title: Re: First beads - which colour glass?
Post by: stuwaudby on November 15, 2010, 12:52:06 PM
To start I would suggest transparent Cobalt blue, transparant Greens, transparant Ambers or black. All these colours give a good indication of what temperature and viscosity they are at.

Beginners should avoid:
Clear - no indicaiton of melting.
White - colour changes to clear well above melting point, awkward to get a good shape.
Ivory - very quick to melt and can take ages to set again.
Reds - usually go grey and need to be striked (cooled and re-heated) to get the colour back.
Title: Re: First beads - which colour glass?
Post by: princess pink on November 15, 2010, 01:20:42 PM
i used blues when i first learnt. periwinkle still remains a fav but i must use it more!
Title: Re: First beads - which colour glass?
Post by: Fruddy on November 15, 2010, 01:29:37 PM
Quote from: Blue Box Studio on November 14, 2010, 05:10:08 PM
Quote from: Margram on November 14, 2010, 01:13:03 PM
Have fun and don't worry about odd shapes to start with - you'll soon improve as you practise ;D

You need those odd shaped ones to go in the bottom of the bead release pot so they act as a mixer when you shake it.  Well, that's what I tell myself anyway!  I am evidence that you can fool some of the people all of the time.  ;D

I do that as well!  Plus I always keep all my "Fuglies"..... they are a benchmark for your continued improvement.
Title: Re: First beads - which colour glass?
Post by: noora on November 15, 2010, 02:12:57 PM
I used a lot of transparent green because green is one of my favourite colours :) I think it's good if you like the colours you use at the beginning, so that you'll like the results even if the shapes are a bit off. Just avoid the difficult colours mentioned above.