Frit-Happens !

Lampwork => Common Problems => Topic started by: awrylemming on October 27, 2010, 01:51:06 PM

Title: Glass end caps
Post by: awrylemming on October 27, 2010, 01:51:06 PM
Not quite sure what to call this, so that's it.  I have a bead cooking at the moment which I have visualized, sketched and thought about for the past week - and most of it is perfect, just the way I wanted  it to be (well, sort of) except for the bit that I thought would be easy.  I wanted to put black 'end caps' on a clear encased focal and I couldn't get them to be the right shape, then overheated them so they blended with the clear - boo.  For future reference, could somebody give me some advice on how to do this without cocking up my entire bead.  ???
Title: Re: Glass end caps
Post by: Josephine on October 27, 2010, 01:54:48 PM
The way I do it is to make a small black spacer close to the end of the bead. Heat it and gently marver until it joins the end of the bead.
Title: Re: Glass end caps
Post by: Les on October 27, 2010, 01:56:43 PM
I think that the trick is to work a little cooler and slower too :)