Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Tools and Presses => Topic started by: Blue Box Studio on October 22, 2010, 07:34:52 PM

Title: Mandrels supplier
Post by: Blue Box Studio on October 22, 2010, 07:34:52 PM
I've searched through the threads for the person who was making mandrels out of 316L welding rods and cutting to size for us but the link I found no longer functions.  I also found the link to a tool that would cut the welding rods and that's a dud too.

Does anyone have a working link to the 'we've cut them to the size you wanted' shop on Ebay, or the tool that cuts through welding rod like a knife through butter?

Thanks.
Title: Re: Mandrels supplier
Post by: garishglobes on October 22, 2010, 08:07:25 PM
Diane (dinah46) has some, I think...
Title: Re: Mandrels supplier
Post by: Kaz on October 22, 2010, 08:11:49 PM
She does - she's just having a few days off but worth waiting for her to come back as the 2mm mandrels are perfect!
Kazx
Title: Re: Mandrels supplier
Post by: elburnzo on October 22, 2010, 08:23:08 PM
Quote from: Kaz on October 22, 2010, 08:11:49 PM
She does - she's just having a few days off but worth waiting for her to come back as the 2mm mandrels are perfect!
Kazx

definately worth the wait, the 2mm mandrels are perfect
Title: Re: Mandrels supplier
Post by: Calico Cat on October 22, 2010, 09:12:00 PM
I also need some long 2mm mandrels - the ones I have at the moment are a bit too short for the new kiln so I'm having to use 2.4mm ones.
Title: Re: Mandrels supplier
Post by: Kaz on October 22, 2010, 10:06:19 PM
Diane is doing longer ones now too :)
Kazx
Title: Re: Mandrels supplier
Post by: Blue Box Studio on October 22, 2010, 10:47:57 PM
Thanks, will wait for her to come back.
Title: Re: Mandrels supplier
Post by: dinah46 on October 22, 2010, 10:48:59 PM
Thanks for the plug everyone :D

The website's open for mandrel orders until tomorrow pm and then it'll be open again november 1st when my daughter is safely married off  and there are no more tiaras or wedding stuff to do ;D (til the next daughter ::) )
Title: Re: Mandrels supplier
Post by: Lotti on October 23, 2010, 10:44:05 AM
I've got these too, and they are brill. :)
Title: Re: Mandrels supplier
Post by: Blue Box Studio on October 23, 2010, 10:48:18 AM
Ooh, I was looking for 3mm... :( I've a stash of chokers that won't fit through 2.4mm mandrel holes - I've tried double and triple dipping the mandrels and reaming out the holes a bit but neither are proving terribly satisfactory (operator error) and a previous thread said the ebay person, who seems to have disappeared, had 3mm welding rods.

Any more suggestions.

(Sorry Dinah).
Title: Re: Mandrels supplier
Post by: cbeadies on October 23, 2010, 10:57:27 AM
I think Maria Louisa has them on her Beadpress site....maybe the Beadpress express would bring some over ??  :D
Title: Re: Mandrels supplier
Post by: Calico Cat on October 23, 2010, 12:10:32 PM
Quote from: dinah46 on October 22, 2010, 10:48:59 PM
The website's open for mandrel orders until tomorrow pm and then it'll be open again november 1st when my daughter is safely married off  and there are no more tiaras or wedding stuff to do ;D (til the next daughter ::) )

I'm off to Dublin for the Knitting & Stitching show - back 1st November - so I'll order some then  ;D

Hope the wedding goes well.
Title: Re: Mandrels supplier
Post by: MangoBeads on October 23, 2010, 03:55:46 PM
Quote from: Blue Box Studio on October 23, 2010, 10:48:18 AM
Ooh, I was looking for 3mm... :( I've a stash of chokers that won't fit through 2.4mm mandrel holes - I've tried double and triple dipping the mandrels and reaming out the holes a bit but neither are proving terribly satisfactory (operator error) and a previous thread said the ebay person, who seems to have disappeared, had 3mm welding rods.

Any more suggestions.

(Sorry Dinah).

we are looking into getting 3mm just got to chase our supplier !!!!
Title: Re: Mandrels supplier
Post by: Blue Box Studio on October 23, 2010, 10:47:16 PM
I managed to track down Dynaflow.  They've stopped selling welding rods but have some left and are going to let me know what they have.  If nothing comes of this then I'll be interested in Manda's mandrels.
Title: Re: Mandrels supplier
Post by: Fruddy on November 05, 2010, 04:48:30 PM
Try Creative Glass - I have bought from them and they're fab.

http://www.creativeglassshop.co.uk/tools-accessories-and-kilns-tools-c-43_44_48.html
Title: Re: Mandrels supplier
Post by: MangoBeads on November 05, 2010, 04:57:06 PM
As from end of next week we will supply 3mm and 4mm mandrels to add to our 5mm, 6mm, 9mm amd 12mm . We have been promised they will be ready !
Title: Re: Mandrels supplier
Post by: Blue Box Studio on November 05, 2010, 05:36:28 PM
Quote from: Fruddy on November 05, 2010, 04:48:30 PM
Try Creative Glass - I have bought from them and they're fab.

http://www.creativeglassshop.co.uk/tools-accessories-and-kilns-tools-c-43_44_48.html

Oh that's not fair.  More places to spend my money.  Off to join Lampworkers Anonymous - (like AA without the booze but still has bottles you can melt).  I got my stash from Dyanflow but will no doubt need more.
Title: Re: Mandrels supplier
Post by: squirsygirl on November 05, 2010, 08:41:42 PM
QuoteOff to join Lampworkers Anonymous - (like AA without the booze but still has bottles you can melt).

snort!   :D

Kirsty