Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Studio/Workspaces => Topic started by: poledra1958 on June 26, 2010, 03:45:50 PM

Title: Shedo moving on - Part 2
Post by: poledra1958 on June 26, 2010, 03:45:50 PM
As I mentioned a few weeks ago, power has today been installed, managed to get the filing cabinet moved out  ;D  and also had a bit of a tidy up, just need to add one more bit of work top.  (Probably will not look this clean again for a while so thought I would add some pictures)

Lampworking area
(http://www.jewellerybyjenny.co.uk/pictures/shed1.JPG)

Frits Shelves
(http://www.jewellerybyjenny.co.uk/pictures/shed2.JPG)

Kiln (general area)
(http://www.jewellerybyjenny.co.uk/pictures/shed3.JPG)

Area for the extra worktop (where the rotary polisher will be set up)
(http://www.jewellerybyjenny.co.uk/pictures/shed4.JPG)

Jenny
Title: Re: Shedo moving on - Part 2
Post by: Krysia@No98 on June 26, 2010, 03:54:06 PM

looking good, you must be itching to get in there
Title: Re: Shedo moving on - Part 2
Post by: ♥♥Tan♥♥ on June 26, 2010, 05:36:16 PM
That is looking so good!
Title: Re: Shedo moving on - Part 2
Post by: poledra1958 on June 26, 2010, 05:41:27 PM
Thanks I know it is only a small space but it is all mine.  Its going to be good working out there, as least now I have power for the kiln, even though I batch anneal at least I do not have to plan it around when I do not need the cooker  ;D  as before that was the only place I could put the kiln was on the cooker.

Jenny
Title: Re: Shedo moving on - Part 2
Post by: Krysia@No98 on June 26, 2010, 05:48:34 PM

I moved my bed into the small bedroom so that I could set up the master bedroom as my study/dressing room (can't fit the wardrobe in the bedroom and have the bed in there)/studio.

A dedicated space is very important  ;D
Title: Re: Shedo moving on - Part 2
Post by: Lush! on June 26, 2010, 06:37:46 PM
Wow Jenny, that looks fab and I love your red kiln!   You might wanna whip that protective plastic off your bench clamp thingy before you start  ;)
Title: Re: Shedo moving on - Part 2
Post by: poledra1958 on June 26, 2010, 06:52:59 PM
Quote from: Lush! on June 26, 2010, 06:37:46 PM
Wow Jenny, that looks fab and I love your red kiln!   You might wanna whip that protective plastic off your bench clamp thingy before you start  ;)

Opps have been using it since April did not know the plastic came off, I thought it was a coating on the metal, when at first I put rods on it was melting a bit so just stopped putting the rods down on it.  Will try taking it off before I start next time.

The red kiln is a Prometheus Pro 1.

Jenny
Title: Re: Shedo moving on - Part 2
Post by: Lush! on June 26, 2010, 06:57:26 PM
Ha ha!  I think its that kind of film covering that you get on screens and things!
Title: Re: Shedo moving on - Part 2
Post by: poledra1958 on June 26, 2010, 07:10:05 PM
OK plastic is now removed   ;D ;D ;D ;D ;D ;D  (where is the smiley that it is hitting its head when you want one)

Jenny
Title: Re: Shedo moving on - Part 2
Post by: Margram on June 26, 2010, 11:35:28 PM
You are sooooo nearly there 8). What's your ventilation going to be like?

Funnily enough, I had a good old tidy up before I worked today - couldn't think with the usual muddle,
must be the heat. I took a photo I was so impressed! :P
Title: Re: Shedo moving on - Part 2
Post by: MyPrecious on June 26, 2010, 11:56:22 PM
Your studio looks soooo great!
Title: Re: Shedo moving on - Part 2
Post by: poledra1958 on June 27, 2010, 07:57:56 AM
The door is just behind me and just above the frits is an air brick which I was going to put an extractor in.  I do not think I would be working with the door shut the shed is to small to do that.

Jenny
Title: Re: Shedo moving on - Part 2
Post by: Krysia@No98 on June 27, 2010, 12:44:43 PM

Yeah, I have my ventilation going out through an air brick too.  I do 4 hour shift sometimes with no head aches and the CO2 alarm hasn't gone of so I assume it's working :D

Also it means that you don't have to make a hole in the wall.
Title: Re: Shedo moving on - Part 2
Post by: alchemist on June 27, 2010, 04:24:37 PM
Jenny, I love it....I'm working on an old singer sewing machine stand set up in my sun room, with the back door open ???  I need to convince hubbie I'm serious!
Title: Re: Shedo moving on - Part 2
Post by: Nick on June 27, 2010, 05:47:21 PM
Hi,

Great space you must be so chuffed