Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Tools and Presses => Topic started by: ScarletLeonard on June 03, 2010, 02:11:18 PM

Title: Mandrel Sizes
Post by: ScarletLeonard on June 03, 2010, 02:11:18 PM
Going to assume this is a newb question....

Our dear American counterparts use imperial measurements for the mandrel sizes. Since I also sell on artfire I want to be able to add the imerial measurement as well as the metric so they can understand what I am talking about.

Does anyone have a conversion chart/translation of the mandrel sizes?

Scarlet xx
Title: Re: Mandrel Sizes
Post by: garishglobes on June 03, 2010, 02:35:02 PM
http://www.engineeringtoolbox.com/inches-mm-conversion-d_751.html (http://www.engineeringtoolbox.com/inches-mm-conversion-d_751.html)

should do it :)
Title: Re: Mandrel Sizes
Post by: ScarletLeonard on June 03, 2010, 03:05:57 PM
Thank you muchly.

You know it didn't occur to me to google imperial > metric conversions not thinking right.

Scarlet xx
Title: Re: Mandrel Sizes
Post by: garishglobes on June 03, 2010, 03:10:06 PM
 ;D ;D ;D
Title: Re: Mandrel Sizes
Post by: Kaz on June 03, 2010, 03:17:24 PM
Probably worth adding the standard ones here:

1.6mm = 1/16
2.0mm = 5/64
2.4mm = 3/32
3.2mm = 1/8
4.0mm = 5/32

Or thereabouts :D
Kazx
Title: Re: Mandrel Sizes
Post by: stuwaudby on June 04, 2010, 12:03:21 PM
Wire is often sold in AWG (American wire guage)

http://www.engineeringtoolbox.com/awg-wire-gauge-d_731.html
Title: Re: Mandrel Sizes
Post by: flaming beads on June 17, 2010, 10:32:51 AM
What useful info..thankyou ;D