Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Oxycon/Oxygen/Propane => Topic started by: sandie on April 19, 2010, 07:24:46 PM

Title: Oxycon stuck at 0
Post by: sandie on April 19, 2010, 07:24:46 PM
Please could someone help?
I've used my oxycon 5 or 6 times. Today the gauge won't go above zero, though it is making its usual noises. I've tried a few times. I got it from Tuffnells and it's practically new. Any advice gratefully received.
Title: Re: Oxycon stuck at 0
Post by: hollergrafik on April 19, 2010, 07:26:39 PM
Get back onto Martin, he will sort you out Sandie.
Title: Re: Oxycon stuck at 0
Post by: Sulis (Hazel) on April 19, 2010, 07:27:37 PM
I know this sounds a bit daft, but have you double checked that the torch valve is open fully? I've done this before!!!  :)

If not, Martin is a good bet  :)


xx
Title: Re: Oxycon stuck at 0
Post by: sandie on April 19, 2010, 07:40:42 PM
Good idea and it would be like me not to!
I'm wondering if it just got cold and damp. It's in a static caravan and we've had deep frosts lately, and as I leave the windows open it's quite damp in there. I've rubbed it down lovingly and dragged in a leccy radiator and shut the door, so it should get quite cosy. I'll try again in an hour or so. Please send it positive thoughts!
Title: Re: Oxycon stuck at 0
Post by: hollergrafik on April 19, 2010, 07:46:32 PM
you could also try the lifting it a few inches and dropping it.
Title: Re: Oxycon stuck at 0
Post by: sandie on April 19, 2010, 07:47:12 PM
Oh! I didn't know that would help. Thank you! Off to try it now...
Title: Re: Oxycon stuck at 0
Post by: ♥♥Tan♥♥ on April 19, 2010, 07:51:49 PM
Sending your oxycon happy thoughts Sandie, hope he gets sorted soon :-*
Title: Re: Oxycon stuck at 0
Post by: hollergrafik on April 19, 2010, 07:54:20 PM
Like Hazel says make sure the torch is open or not blocked. Try unscrewing the oxy pipe at the green nozzle on the unit to see if it goes up.
Title: Re: Oxycon stuck at 0
Post by: Sulis (Hazel) on April 19, 2010, 07:56:31 PM
Happy thoughts, happy thoughts, happy thoughts!  ;D



xxx
Title: Re: Oxycon stuck at 0
Post by: Dragonfire Glass on April 19, 2010, 08:05:53 PM
I'm surprised you haven't contacted Martin
Title: Re: Oxycon stuck at 0
Post by: sandie on April 19, 2010, 08:15:16 PM
Quote from: Failariel on April 19, 2010, 08:05:53 PM
I'm surprised you haven't contacted Martin
He'd have gone home by that time. Would have rung in the morning.
Title: Re: Oxycon stuck at 0
Post by: sandie on April 19, 2010, 08:16:39 PM
It worked! I lifted it a bit, dropped it (gingerly and with everything crossed), and it purred away happily!
And I made a bead! Rubbish by any standards, but actually vaguely bead-shaped! Thank you thank you thanks you!  :-* :-* :-*
Title: Re: Oxycon stuck at 0
Post by: Dragonfire Glass on April 19, 2010, 08:18:05 PM
We could do with a 'what you do when your oxycon won't cooperate' list  :D
Title: Re: Oxycon stuck at 0
Post by: hollergrafik on April 19, 2010, 08:22:30 PM
Quote from: sandie on April 19, 2010, 08:16:39 PM
It worked! I lifted it a bit, dropped it (gingerly and with everything crossed), and it purred away happily!
And I made a bead! Rubbish by any standards, but actually vaguely bead-shaped! Thank you thank you thanks you!  :-* :-* :-*

Yayyyyyy glad it worked Sandie
Title: Re: Oxycon stuck at 0
Post by: Sulis (Hazel) on April 19, 2010, 08:24:00 PM
 ;D ;D ;D