Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Tools and Presses => Topic started by: dunkster on March 30, 2010, 01:04:45 AM

Title: how much do you rely on presses?
Post by: dunkster on March 30, 2010, 01:04:45 AM
i am aiming this one mainly towards the more experienced out there.

I Have been, for a while, assuming that presses are used for the more beginner/intermediate levels in lampwork to perhaps compensate for their lack of ability to form the shape required by freehand methods.

i have seen some amazing quality of work. (especially lush lampwork at chepstow rock and bead show) and consider it craftsmanship at its best and somewhere that i would love to get to in the future. but how much of the process of shaping and sizing of the beads do you guys form with the use of all the presses out there?

are there one or two essential ones  that i need to get and start using in my everyday lampworking? or is the recommendation to continue improving my skills by freehand methods only? (except for marvers and paddles that is)
Title: Re: how much do you rely on presses?
Post by: Black Heart Beads on March 30, 2010, 01:52:05 AM
Personally I only have a crunch, it is simple to use and I find it a handy bit of kit. However some presses need more skill to use well, requiring an ability to get an exact amount of glass on the mandrel to get a good shape with puckered ends. Like with most things PPP is needed.

The more experienced you are the more you can do with them. Take a look at http://www.frit-happens.co.uk/forum/index.php?topic=19485.msg336125#msg336125 I haven't got the tutoral but it looks like she uses presses in making her armadillo beads.

I don't make many sets and enjoy sculptural work so haven't felt the need to have a collection of presses. Which is lucky as they can be quite expensive.

Title: Re: how much do you rely on presses?
Post by: Kaz on March 30, 2010, 07:22:05 AM
It's actually almost the opposite - you need to get really good at making donut beads and hand/gravity shaped beads in order to make great beads using a press. It takes a lot of practice to get presses right - so you have the right amount of glass and neat ends. When you use presses a lot (as I do!) you have to make sure you also do a lot of handshaped beads so you don't lose the knack. For someone starting out, the best press is a lentil one.
Kazx
Title: Re: how much do you rely on presses?
Post by: Trudi on March 30, 2010, 09:06:01 AM
yep - when I was starting out I thought a press would be the answer to my problems  ;D  ;D  ;D. But I agree, it takes skill to be able to get your footprint right, the right size and centered . and you also need to learn how to use each one. With different shapes they need a slightly different approach! And then there's more skill involved when you make the beads with patterns etc.

For a beginner, I would suggest a press that has more defined edges would be best to start with - ie a straight sided lentil or tab press. Perhpaps if you know someone close by you could try one out?

Hope that helps.
Title: Re: how much do you rely on presses?
Post by: garishglobes on March 30, 2010, 09:46:26 AM
I'd agree too, it does take time to actually be able to use the presses well, particularly the more complex shapes.
I don't have many presses, I much prefer marvers. For me, rolling to get the shape just works better (where it is possible to do this)! I have a crunch and a lentil press but all the rounds, ovals, bicones etc... I'd do with the marver.
Title: Re: how much do you rely on presses?
Post by: dinah46 on March 30, 2010, 11:46:52 AM
Wot they all sed ;D

I think the presses and other shapers are all just tools to achieve the look you want.  There is no magic tool that will do it all for you and the presses are only as good as the person using them.  Horses for courses.

I have phases of only hand shaping and then I suddenly think one particular press is the one I can't live without ???
Title: Re: how much do you rely on presses?
Post by: sarah t on March 30, 2010, 02:43:21 PM
getting the shape right is only half the battle ;) ...and i love my presses especially the lentels ...i think as a newbi the pleasure and incentive i got from getting two beads consistant in size and shape was a eureka moment for me
Title: Re: how much do you rely on presses?
Post by: Yellow friend on March 30, 2010, 04:20:53 PM
I have a couple of presses but 99% of the time prefer to use a marver.  I think it takes more skill than you think to use them but also depends on the kind of beads you make. 
Title: Re: how much do you rely on presses?
Post by: Lush! on March 30, 2010, 07:05:13 PM
Thank you for the lovely compliment, Dunkster  :-[

I agree with what the others have said - using presses well takes a considerable amount of expertise and precision, but I find them invaluable for giving consistent shapes and sizes.
Title: Re: how much do you rely on presses?
Post by: ♥♥Tan♥♥ on March 30, 2010, 07:20:51 PM
Not much of a press person at all, but when I do rediscover them I do love them. The only problem is you do have to be exact each time because there is nothing as obvious as a mis pressed bead.
Title: Re: how much do you rely on presses?
Post by: Helen G on March 30, 2010, 08:56:29 PM
Agree with the others, a press is not the easy option.
There is a surprising amount that can be done without presses, as I learnt from Sally Carver, but I personally couldn't be without my lentil press. I lalso use just the top half of my marble press regularly as a marver since Lorna Prime showed me how  ;D
Title: Re: how much do you rely on presses?
Post by: Les on November 28, 2011, 05:16:05 PM
There really is no substitute for learning the basics and learning them well :)
Title: Re: how much do you rely on presses?
Post by: Redhotsal on November 28, 2011, 07:15:33 PM
Heh thanks Helen  ;)

I used to be very anti-press, but that was because I kept seeing a lot of badly pressed beads. I also used to think that presses were just an easy option. I couldn't (still can't) see why people would want to churn out lots of beads which all look the same. Okay - they're handy for a set of matching beads, and to be frank - as a professional bead maker they're invaluable to me as I would struggle to hand make a really large lentil consistently time after time, but I think there is so much fun to be had by hand shaping your work.

It is horses for courses I agree, that it's all down to what you want to do - do you want to make string after string of identical beads? If so, use a press. If you want to make one off creations that you'll never repeat again then don't use a press. If you want to make lots of unique and individual beads with a similar shape (bit like Sarah Horniks' work, for example) then use something like a Crunch press to suggest a shape after you have created your bead. Don't forget that presses will limit you to a particular size, most of the time.

I also agree with earlier comments - presses are not always easy to use. I reckon if you see them as a tool to steer you towards a desired shape it's better than trying to use them as a one-step mould to a perfect shape. Hope that makes sense?

Lentil presses are a good all round starter as this shape is tricky to achieve by hand, I also like crunch presses as they are easy to use and give a good result. I would avoid some of the more esoteric shapes as they are often difficult to use and have limited appeal.
Title: Re: how much do you rely on presses?
Post by: Krysia@No98 on November 28, 2011, 07:17:41 PM
I have presses and I do use them a lot.  I have a few presses that I have a love hate relationship with, hate using it but love the end result.

The best thing I have found for the press is a pair of tweezers so when I put too much glass on I can take it off.

I had a bit of a ta do with some one on FB the other day about presses, he sees them as the easy option and they so are not.  Neither are bead roles for that matter, but they can be very satisfying.

If you decided to get a press think about a shape that you can do lots with (can you add glass on to make it a different shape or into a critter of some sort?) and one that you like.  Remember that if you don't like it they do tend to hold most of their value so you can either swap it or sell it here.  Presses don't tend to stay around for long.  Happy squishing.
Title: Re: how much do you rely on presses?
Post by: ScarletLeonard on November 28, 2011, 08:02:19 PM
I agree with the sentiment of learn to hand shape beads first.

I didn't get my first press until after a year of making beads, my first tool was a graceful customs masher which is a little like a crunch press because it is domed both sides rather than flat. It makes nice thin shapes that can easily be added to with decoration. My first press was a lentil press, then I got a bead roller (I'm a fan of the bead roller because even though now I don't physically use it to roll the basic shapes it's great for making sure the beads are the same size, the rest of my bead rollers are fancy shapes which would be a bit of a challenge to get consistent for making sets.)
I also have a heart press because try as I might I can't make a nice heart with the mandrel running top to bottom. So I press and decorate, though that does require me to build the heart the same way I would if I was handshaping it takes out the oops bits I get if I do it purely by hand. (though like the rollers I expect it to get there eventually.
Title: Re: how much do you rely on presses?
Post by: MadelineBunyan on November 28, 2011, 08:16:54 PM
I'm finding this all rather interesting.

up until about may this year I would have said I really don't get on with presses, why do I need them, they're expensive and I never got good results with the one I had and sold it.

however...
I then bought a straight lentil press, and I loved it, soo easy to use compared to the others I had tried (a non ss lentil and a charm box) I loved the beads I could make, I saw them as a base for other stuff, not as a shape in itself, though I do use them like that sometimes.
I think, in the meantime (nearly 2 years) I became a much better beadmaker, and can make better use of the range of tools I can get my hands on!

I'm now somewhat of an addict! I love presses! I have ...ermm...quite a few!
there are some shapes that are nearly impossible or really really time consuming to do by hand(or marver!)

oooh Krysia, I would have had some words to say on that front! don't let him near me whatever you do!

I have never ever ever liked making sets, I still dont really. but my rollers and my presses make it bearable, and I like the sets that I make much more than almost any set I made without them (not that there were many! pairs and mixed type sets mainly!) I made mostly bhbs and large focals for a long while.


I think, at the end of the day its just a tool, if you like it, and use it well and make good beads faster than you would without, great. I make pressed beads and handshaped beads, I like both, theres something great about the freedom of a handshaped bead that I never realised before presses. I still prefer to do hearts without one.

I wouldnt say I rely on presses, but I think I would probably bite anyone who tried to take them away from me!
Title: Re: how much do you rely on presses?
Post by: Krysia@No98 on November 28, 2011, 10:10:04 PM
Quote from: MadelineBunyan on November 28, 2011, 08:16:54 PM

oooh Krysia, I would have had some words to say on that front! don't let him near me whatever you do!


You'll be pleased to hear I got the last word in.  I don't think I changed his mind, life's too short to attempt that.  I told him that I didn't think he was fair to say pressed were the easy option and that there are some truly amazing beads out there made out of presses.  (yes Julie, yours did pop into my mind as I was telling him that  ;) )