Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Oxycon/Oxygen/Propane => Topic started by: ABCreations on April 13, 2007, 09:45:15 PM

Title: Oxycon konks out all the time
Post by: ABCreations on April 13, 2007, 09:45:15 PM
I hope, that someone will be able to help me, coz I'm at my wits end. I bought an oxycon in January and it worked fine till last week. I was torching for about one hour, pressure was fine when all of a sudden the red light came on and it konked out  :-\. Next day I tried again, I worked for about 4 hours - no problems at all. Day after, it konked out after about 2 hours. Following day the same again. Since it started it happens more often, more quickly. Is the oxycon on it's way out?  ???

Any help is very much appreciated!

Jo :)
Title: Re: Oxycon konks out all the time
Post by: Stacy on April 13, 2007, 09:58:58 PM
I am in no way an expert (had mine for less than one month) but apparently one of the things you can try is to hold it about 4 inces off the ground and drop it.

However, I would hang fire until someone with more experience answers, just incase thats the solution to a specific problem and not just an all rounder thing.

I'm pretty sure Martin from Tuffnels would be able to put you in the right direction also I'm guessing Quinton a.k.a glassworks would be a good guy to talk to as he sells them..

Good Luck
Stacy
Title: Re: Oxycon konks out all the time
Post by: Caroline on April 13, 2007, 10:00:44 PM
what she said ;D
Title: Re: Oxycon konks out all the time
Post by: Mary on April 13, 2007, 10:07:40 PM
If it was Martin or Q you bought it from, you'll have a guarantee.
Title: Re: Oxycon konks out all the time
Post by: *Nicky* on April 14, 2007, 12:37:55 AM
Are you running it too high ? apparenly 4.5 is a good gauge ? pressure ? (what ever 4.5 is) but if you have it upto 5 it can start flashing different coloured lights ! 
Title: Re: Oxycon konks out all the time
Post by: glassworks on April 14, 2007, 07:41:29 AM
hi chap - try the drop thing - sometimes the compressor needs a good jolt...

i don't recognise your name - but i know martin has an excellent warranty too - if you need to have yours looked at and bought it somewhere else give me a pm and i can get it to my guys for a look?..

cheers

Q
Title: Re: Oxycon konks out all the time
Post by: ABCreations on April 14, 2007, 08:16:01 AM
Thanks everyone for your advice!

Hi Quinton,

ABCreations is the same as 'artfulbeadcreations' LOL I think, you might recognise the name now?  ;)
I'm running it on 4.5 and I've also done the 'drop' thing last night. I was going to have a long torching day but while the oxycon kept going for 4.5 hours in the beginning, it chucked me off after 1.5 half hours this morning. At this rate I might as well use my hot head again.  >:( I'm very grateful for your advice though. I'm still hoping, that the darn thing might sort itself out but the chances are slim. Is it possible that the trouble I got is caused by a lose connection inside the oxycon? My hubby is quite technical and might be able to figure it out.... if I let him?  :-\

Thanks again,
Jo ;)
Title: Re: Oxycon konks out all the time
Post by: glassworks on April 14, 2007, 08:24:36 AM
the oxycon is quite a simple beast internally - the cover unscrews at the bottom and then opens like a book.. although it is possible that there is a loose connection, it is more likely to be that the chemical packs or compressor need looking at.. judging by the nature of this i think the compressor is the root of this particular problem..

did you get one of ours - i only ask because we are in the uk this morning away from our server so i can't check our sales records?.. if so - we shouldn't even have this discussion and i will ship a replacement immediately, and get yours back to our supplier?..

they are very simple beasts at heart - if your hubby pops it open it is basically a compressor and then the two "lungs"...
Title: Re: Oxycon konks out all the time
Post by: ABCreations on April 14, 2007, 08:38:42 AM
Hi Quinton,

I really wish, I'd bought it from you but.....  :'(  It is under warranty so I will have to send it off to the supplier. I wish, they'd answer emails..... that's were the hassle starts. Unfortunately, I live Pembrokeshire and sometimes it seems to be the other side of the world, when it comes to supplies etc.
Oh, another question for you Q: Does the oxycon have to be upright on it's 'travels'? My daughter lives near the supplier but she's only got a small-ish car and I'm really afraid that it might get damaged on the way (The oxycon, not the car LOL). She will come to see me in 4 weeks time, she lives 350 miles from here, in Nottingham. Suppose, I should try to find a carrier for my asthmatic, little friend.... :-(
Title: Re: Oxycon konks out all the time
Post by: glassworks on April 14, 2007, 08:48:26 AM
oh nooooo chap, if you have no luck from them let me know and i will see what my supplier can do - we can maybe send you a swap out unit?..

the best way for our little friend to travel is upright, strapped into the back seat like the baby it is!!

pm me if you like, we'll see what we can do....

Q 8) ;D
Title: Re: Oxycon konks out all the time
Post by: ABCreations on April 14, 2007, 09:42:25 AM
Just received my glass order, Quinton. Fantastic!!!! Super service, thank you!!!

:-* :-* :-*
Title: Re: Oxycon konks out all the time
Post by: Dragonfire Glass on May 10, 2007, 08:00:15 PM
could just be a faulty filter Jo
Title: Re: Oxycon konks out all the time
Post by: flybynight on May 18, 2007, 10:52:22 PM
Have you tried vacuuming the filter yet?  It should have a regular clean up...
Title: Re: Oxycon konks out all the time
Post by: Redhotsal on May 19, 2007, 12:12:02 AM
Is the fan working - it won't operate unless it is ok?