Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Tools and Presses => Topic started by: Steampunkglass on September 09, 2009, 11:50:11 PM

Title: New Marble Toy! ***Now with a quick review
Post by: Steampunkglass on September 09, 2009, 11:50:11 PM
I have a new toy!!!! (http://2.bp.blogspot.com/_XYN-HbcLiTU/Sqguu7QAdjI/AAAAAAAAAHg/DlWFZNdZtZI/s320/marblemold.jpg)
It's  a multihole, infinate rim graphite marble mould! On one side are four holes, on the back is one BIG inch hole too.

For those of you who aren't marble bores (so probably anyone who isn't me! ;) :D ) this has special shaped conical dips to provide a better edge for making marbles - only the rim of a marble mould is normally used. By making them a sort of part conical shape it's meant to give a rim that's always a perfect size for the marble you put in it.

I don't know if it will really be any better than a regular one, but the graphite is really really good on it, so I am hoping so! It's also pretty solid made too, even the counter-weight finial has a little spiral pattern too!
Title: Re: New Marble Toy!
Post by: glassworks on September 10, 2009, 07:14:36 AM
this, i am not embarrassed to admit, is COOL!!!!

i am a trainee marble jockey myself!...  ;)
Title: Re: New Marble Toy!
Post by: sublimekate on September 10, 2009, 07:35:41 AM
Niiiiiiice  :)
Title: Re: New Marble Toy!
Post by: Trudi on September 10, 2009, 08:17:35 AM
There'll be no stopping you now glenn!
Title: Re: New Marble Toy!
Post by: Chameleon on September 10, 2009, 08:17:58 AM
that looks lovely !!  ;D
Title: Re: New Marble Toy!
Post by: Hamilton Taylor on September 10, 2009, 08:18:19 AM
I've contemplated buying one of these - would you let us know how you get on?
A nice big comprehensive review is in order, I think.   :)

Oh, with pictures!   :D

Sean
Title: Re: New Marble Toy!
Post by: Trudi on September 10, 2009, 08:24:16 AM
calm yourself Sean!
Title: Re: New Marble Toy!
Post by: Andy on September 10, 2009, 08:33:09 AM
Is it possible to make marbles using a HH?
Title: Re: New Marble Toy!
Post by: garishglobes on September 10, 2009, 09:04:30 AM
Having had a quick (only too brief) handle of this one, I have to say it is one incredibly sexy piece of kit! :D
It has a lovely weight to it and is enough on its own to start a marble obsession. Enjoy it ;D
Title: Re: New Marble Toy!
Post by: Mary on September 10, 2009, 10:47:35 AM
What a lovely thing! Makes me want to make marbles just so I can buy one!
Title: Re: New Marble Toy!
Post by: Steampunkglass on September 10, 2009, 11:21:03 AM
Don't worry I will quite happly bore you with lots of details as soon as I can sneak into the workshop to play with it and report back (if I can tear myself away from it  ;) )

As for making marbles with a hot head, I really don't knowfor sure, but I guess you could. I'm rubbish at making soft glass marbles, I really only use boro, it seems to need a lot of skill to do them in soft glass anyway (Bows to Seans marvlous marbles!) whereas boro is a bit more forgiving. I don't see why not though!
Title: Re: New Marble Toy!
Post by: Linz on September 10, 2009, 02:41:48 PM
Oooh that's nice! *tool envy!*
Title: Re: New Marble Toy!
Post by: littlehondachop on October 02, 2009, 06:23:58 PM
Quote from: Linz on September 10, 2009, 02:41:48 PM
Oooh that's nice! *tool envy!*

what she said, me want one NOW!!!!!!!

sam xx
Title: Re: New Marble Toy!
Post by: Steampunkglass on October 05, 2009, 04:14:37 PM
I've now finally had a proper chance to play with this, and on ballance I would say it's very good! I still think it's a bit pricey, but I have found it's a lot quicker and easier to get marbles roughed out and into shape with it than using a traditional marble mould. The only problem I've found is sometimes it's too easy to get them smooth, and I had some marbles with slight dents that I didn't notice, whereas with the normal mould I could feel the dents as a slight catch as I run the marble around in it. I now give a quick pass through the old mould now just to be sure as I finish them off.

On the whole though I would say if you're going to make a lot of marbles it's worth getting one, I'm spending more time now working on designs rather than just sitting there beating them into shape.
Title: Re: New Marble Toy! ***Now with a quick review
Post by: Hamilton Taylor on October 05, 2009, 04:26:44 PM
Bizarre, I came to FH straight from Drew Fritts' site, where I was havering over ordering one! Not done it yet, but I think I prob'ly will, now...

Sean
Title: Re: New Marble Toy! ***Now with a quick review
Post by: Forester18 on October 05, 2009, 04:41:20 PM
I was looking and thinking about one of these after seeing it on Drew Fritts website. Now having read his book he has a section on turning moulds out of cherry wood. I have a stock of this and am considering turning some, I believe he burns in the edges. I used to use something similar some years ago when I was making paperweights but this was on gathers from a furnace. I was wondering if you had any experience of wooden moulds.

Frederick 
Title: Re: New Marble Toy! ***Now with a quick review
Post by: Steampunkglass on October 05, 2009, 05:30:46 PM
I've not tried wood moulds, I've mostly found a good flame polish does the business enough for me so far.

I didn't actually order from Drew Fritt site, mine came though ABR who do the range - need a bigger torch before I can think about the 2 and 3inch monsters!
Title: Re: New Marble Toy! ***Now with a quick review
Post by: Trudi on October 05, 2009, 08:30:08 PM
glad that you're enjoying it Glenn - I guess if it's working and you'll use it a lot then it's worth it!
Title: Re: New Marble Toy! ***Now with a quick review
Post by: Forester18 on October 06, 2009, 02:55:46 PM
Glenn, I've just been looking again at Drew's website and I see that these moulds go up to 6" !!! and that is one hell of a lot of glass.
you mentioned 2" & 3". I'd have thought that when you get above 2" you'd probably be looking at gathers from a furnace and then use a gloryhole. My original plan was to make paper weights using gathers from a furnace but I found the cost would be prohibitive. That is why I am for the time being concentrating on beads and a a few small flame-worked sculptures. I still have the design for a combined glory/furnace. It was an idea that William Manson used some years ago. I've also got all the materials to make it. Basically it's a small glory with a sump wich acts as a furnace. Maybe one day I'll get round to constructing one of these. Good luck with your new mould - look forward to seeing some pics.

Frederick
Title: Re: New Marble Toy! ***Now with a quick review
Post by: garishglobes on October 06, 2009, 03:15:17 PM
Apparently there is a small glory hole out there somewhere that uses a torch as heat. Becky (Chameleon) was telling me about it, but she told me to go and look up "mercy glory hole" - and the results weren't quite lampworking!! :o
She did say it used a lot of gas..
Title: Re: New Marble Toy! ***Now with a quick review
Post by: Forester18 on October 06, 2009, 05:25:15 PM
Yep, there are small ones called fire buckets - avoid! the insulation is frag which is carciogenic.