I'm a bit gutted. I made a bit of a whopper, probably the best bead I have ever made.... I obviously didn't keep it hot enough because it split in two as I was taking it off the mandrel >:(
It was loaded with precious Ekho and looked really pretty, so assuming it comes out of the kiln still pretty....is there a decent glue out there that I can use to glue it back together, as I would like to wear it as a pendant?
Any suggestions most welcome ;D
Then I'll just have to figure out how to hide the join ::)
all depending what kiln you have what about putting it on a fusing schedule and making a pair of earrings out of the 2 halves.
I have an SC2, the bead has a load of silver glass in it, would I lose the colours?
:-\
I think you would loose some of the colours when fusing it.
If it is only fou you, you could use an epoxy glue or an UV glue.
Quote from: afina on August 03, 2009, 08:51:20 AM
If it is only fou you, you could use an epoxy glue or an UV glue.
You can only use a UV glue if the glass is transparent, as it needs UV light to reach the glue for it to activate and cure.
Thank you! It has an opaque core, so I will probably use some epoxy.
Thanks again ;D
It is possible to 'mend' broken beads in the kiln and then flameworking, provided that the bead hasn't broken due to incompatability. If it is a very special bead then I would recommend trying with other broken beads first until you can perfect the technique. Now I need to go a-hunting for the tut...
Modified to add:
How annoying - I can't find the tut but there are a couple of threads on www.lampworketc.com -
http://www.lampworketc.com/forums/showthread.php?t=85061
http://www.lampworketc.com/forums/showthread.php?p=922160
Wow, thanks for that!
If I have any break that won't over-strike at the high temperature I will definitely give that a go!
;D