Frit-Happens !

Lampwork => Common Problems => Topic started by: mcbead on March 16, 2009, 11:42:36 AM

Title: large beads
Post by: mcbead on March 16, 2009, 11:42:36 AM
Is there any reason why big beads can't be made with a Hothead?  I'm thinking upwards of 20mm.  I don't mind the time taken, but is there any other reason?

Thanks in anticipation!

Morna
Title: Re: large beads
Post by: sparrow on March 16, 2009, 11:51:48 AM
Hi Morna, there is no reason why you can't go bigger than 20mm.....it's just a question of keeping the bead hot. I think I ended up on the larger side of 50mm at some point, and I know others have as well. Have a look at Sarah Hornik's beads - she does everything on a hothead, and definitely goes large!
Title: Re: large beads
Post by: Steampunkglass on March 16, 2009, 11:54:18 AM
I can't see a problem, I made some 30mm ones with a hot head, but does take a while to melt anything that big.
Title: Re: large beads
Post by: Trudi on March 16, 2009, 12:54:49 PM
You just need patience and strong arms!!!

I take it that you will anneal as you go - I wouldn't want to risk a big bead to vermiculite or a blanket!
Title: Re: large beads
Post by: Shirley on March 16, 2009, 01:42:02 PM
I've certainly made tubes over 40mm on a hothead, and put them into vermiculite to cool with no problem. You develop a waving in the flame technique to keep them warm while you work. :)
Title: Re: large beads
Post by: mcbead on March 16, 2009, 03:03:10 PM
Thanks for the advice, ladies; much appreciated :)

Morna