Frit-Happens !

Lampwork => Common Problems => Topic started by: Chelly77 on February 18, 2009, 01:01:52 PM

Title: Stringers
Post by: Chelly77 on February 18, 2009, 01:01:52 PM
Afternoon Guys,

I have had a few goes at making stringers and they all come out either really thin or about the thicknes of a pencil lead but lumpy.  Is there a trick to making them just thick enough to form dots and not frizzle up when they go anywhere near a flam becase they are too darn thin?
Title: Re: Stringers
Post by: ♥♥Tan♥♥ on February 18, 2009, 01:51:50 PM
They are coming out too thin because you are pulling the blob too hot and too fast, they are coming out lumpy and thick because you are pulling to cool and too slow.

They frizzle near the flame because you are putting them too near the flame.

When you make your blob to pull stringers, make it about small marble size, let it cool ever so slightly, it needs to be molten but not gloopy, when you pull keep your arms even and the pace steady, keep your eyes on on it as it leaves the molten blob you are pulling away from that will help you gauge the thickness and keep it even.

Before you put it onto a bead just sit with your stringer at the flame and introduce it slowly from the side until it just starts to glow, if it balls up quickly then you are going to near to quick
Title: Re: Stringers
Post by: Jolene on February 18, 2009, 01:55:10 PM
Hi Michelle, there are some great links to tutorials in the Canes and Stringers (http://www.frit-happens.co.uk/forum/index.php?board=52.0) tutorals section on the forum......including some video ones which should help you on your way

Jo x
Title: Re: Stringers
Post by: Chelly77 on February 18, 2009, 01:58:50 PM
Thank you for all the fab advice.  I will have a play when I get home and let you know how I got on :)
Title: Re: Stringers
Post by: ♥♥Tan♥♥ on February 18, 2009, 02:03:06 PM
Oh no, thats not good enough, I expect step by step photographs and a detailed essay on how you went about it and the results presented in bound format...........ok? :D
Title: Re: Stringers
Post by: Chelly77 on February 18, 2009, 02:04:25 PM
Of course of course,  everything in triplicate yes?
Title: Re: Stringers
Post by: Trudi on February 18, 2009, 02:35:43 PM
I found that to pull a thick stringer (like the commercial ones) I used the end of a 2.4mm mandrel as a punty!
Title: Re: Stringers
Post by: Redhotsal on February 18, 2009, 03:45:48 PM
If it's lumpy you may be pulling it in the flame??
If so you dont' want to be doing that.
Get a molten gather going on the end of your rod, and when you have a marble size gather and it is glowing orange take the whole thing out of the flame.
Take a pair of needlenose pliers or a pair of tweezers and nip a very small "pinch" out of the gather on the round end, but don't do any pulling yet.
Count to five. The gather should have lost it's glow.
Pull slowly and speed up as you feel the glass start to stiffen.
Most people pull the glass too quickly - experiment with leaving the gather for a longer or shorter peiod of time prior tp pulling.
Never pull while the gather is in the flame.
Title: Re: Stringers
Post by: lemon kitten on February 18, 2009, 04:49:38 PM
I absolutely LUUUURVE pulling stringers.....just can't apply the damn things evenly!  ;D
Janey x
Title: Re: Stringers
Post by: Lush! on February 18, 2009, 05:01:39 PM
Quote from: shine-on2 on February 18, 2009, 02:35:43 PM
I found that to pull a thick stringer (like the commercial ones) I used the end of a 2.4mm mandrel as a punty!

Or even use a commercial stringer as a punty, I find it helps to remind me what thickness I'm aiming for  ;)
Title: Re: Stringers
Post by: Trudi on February 18, 2009, 05:13:04 PM
Quote from: Lush! on February 18, 2009, 05:01:39 PM
Quote from: shine-on2 on February 18, 2009, 02:35:43 PM
I found that to pull a thick stringer (like the commercial ones) I used the end of a 2.4mm mandrel as a punty!

Or even use a commercial stringer as a punty, I find it helps to remind me what thickness I'm aiming for  ;)

Indeedy!  ;D
Title: Re: Stringers
Post by: ♥♥Tan♥♥ on February 18, 2009, 05:29:35 PM
Or buy them from Martin and parade them as your own in all their perfect glory :D


And twisties from Jolene ;)
Title: Re: Stringers
Post by: TiaraHelen on February 18, 2009, 06:36:27 PM
I love pulling stringers too, but I recently bought a set of white ones from Martin and I love them - they are way more consistent than I can manage!  I bought clear too for really quick encasing - I'd really recommend them at least for beginners like me who can't get the perfect straight even thick stringer.
Title: Re: Stringers
Post by: Kaz on February 18, 2009, 07:40:32 PM
I have to admit it is only within the last few months that I have begun to make my own rather than rely on shop-bought ones! Though I did always have to make SIS of course! My dot work has got more precise though since I started making my own and now I am making it a lot thinner than the commercial ones.
Kazx
Title: Re: Stringers
Post by: squirsygirl on February 18, 2009, 08:52:54 PM
practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  wow I can touch type the word practice now   practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice  practice 

get the picture?  ;)
Title: Re: Stringers
Post by: ♥♥Tan♥♥ on February 19, 2009, 01:49:29 PM
So what are you trying to tell us Kirsty?










:D :D :D :D :D :D :D :D
Title: Re: Stringers
Post by: squirsygirl on February 19, 2009, 06:11:14 PM
well, as I always say - buying ready made stringers makes perfect!

Title: Re: Stringers
Post by: Chelly77 on February 20, 2009, 01:37:32 PM
RedHotSal you are a genius,  they may not be lump free yet but they are at least a decent size now :)

Thank you soo much for you advice

(Wayne's world style) we're not worthy, we're not worthy :D
Title: Re: Stringers
Post by: Wishing Wells Glass on February 20, 2009, 01:59:43 PM
1.  Everyone has given all the advice that I would give already.  My only input would be that I hold the rod at about a 45 degree angle pointing down and pull that way so the hottest part is always the higher end.  Wow, does that make sense outside of my head?!  To make thicker stringers I heat up the middle of a rod into a BIG gather and pull slowly.  Instant punties!

2.  I love you Tan.. you crack me up.  ;)

x