Frit-Happens !

Technical Forum => Studio/workspace/setup/equipment => Torches => Topic started by: kevie192 on January 06, 2009, 08:15:44 PM

Title: HH Bulk
Post by: kevie192 on January 06, 2009, 08:15:44 PM
Hi all,

Just wanted to run something past you all.

I emailed FloGas this week about gas connections and bottles etc. and was told that "There is no need or requirement, from a safety perspective, to use a flashback arrestor as the flame will not back-track down the hose." Is this right??

Thanks,

Kevin x
Title: Re: HH Bulk
Post by: decodragonfly on January 06, 2009, 08:53:41 PM
Hi,
You must be about a hundred steps ahead of me, I'm still sorting out my set up, but I thought flashback arrestors were a must because although the chances of it happening are small the results if it happens are catastrophic.I was going to put them on both propane and oxygen.
Hope it's all going well, have fun!
Title: Re: HH Bulk
Post by: Ian R Pearson on January 06, 2009, 09:01:41 PM
Pre-mix burners can experience a flame burning down a hose as I have witnessed that. Hose protectors and flashback arrestors are a must in this situation and I would question anyone justifying otherwise. However as most use surface mix here then no flash back will happen.

Ian
Title: Re: HH Bulk
Post by: Shirley on January 06, 2009, 09:17:45 PM
Kevin, the set that Martin Tuffnell sell for the bulk connection does include a flashback arrestor. I've read that it isn't strictly necessary, though. I think the reason he includes it is possibly because a lot of people keep the hosing set up if they move onto a propane/oxy torch and you really should an arrestor for that. You could always contact him and find out. Some people on here have managed to get all the bits for a bulk set up together themselves and have saved money. Some, however, have gone to plumbers' merchants and the like and not been sold the right stuff.

So I assume it went ok at the weekend if you're already looking at getting rid of the dreaded MAPP?
Title: Re: HH Bulk
Post by: beadmonkey on January 06, 2009, 10:09:39 PM
It has been suggested before on here that a flashback arrestor is not necessary with a Hothead. However, I think the general consensus is that there may be a slight risk and that it is advisable to have one. I certainly included one when I set up my HH on bulk. I bought all the bits separately and saved quite a bit. In fact the savings I made more or less paid for the flashback arrestor.

Roy :)
Title: Re: HH Bulk
Post by: Black Heart Beads on January 07, 2009, 12:31:35 AM
Come on Kevin show us your beads  ;D
Title: Re: HH Bulk
Post by: mazmeabead on January 07, 2009, 11:07:53 PM
Yeah Kevin;

Wheres the newbie beads? 

Dont be shy ;D

& definately go bulk with FB arrestor...

I had a bit of a scare that made me think - what if?

Maz